Chauvin Arnoux C113 [P01120315] 0.1 - 1200 A AC Clamp Meter Adapter. The Chauvin Arnoux C113 AC 00011200A (1A AC)[L] Current Clamp is an electrical testing current clamp that prioritises safety, accuracy and usability. It is one of 13 clamps available in the C Series from Chauvin Arnoux.  The usability of the device has been greatly improved since its predecessors, with a whole new shape design to make it ergonomic and comfortable to hold. There are also added finger grips to make sure you have a firm hold on the Chauvin Arnoux C113 AC 00011200A (1A AC)[L] Current Clamp when you need it most.  Chauvin Arnoux recognise that safety is a massive priority when it comes to electrical testing and they have provided the Chauvin Arnoux C113 AC 00011200A (1A AC)[L] Current Clamp with several ways to reduce workplace hazards. The clamp uses anti-slipping protection technology to prevent the device from becoming mobile when it is clamped onto a conductor. Not only that, but the anti-pinching technology looks to greatly reduce the risk of any pinch damage being dealt to the conductor you have attached the current clamp to.  The Chauvin Arnoux C113 AC 00011200A (1A AC)[L] Current Clamp can be attached to multimeters, oscillators, wattmeters and even recorders faultlessly. All this, plus you don’t have to worry about breaking the circuit when you are checking the AC measurements of the instrument that the current clamp is connected to.  The Chauvin Arnoux C113 AC 00011200A (1A AC)[L] Current Clamp also boasts a great degree of accuracy. The current clamp gives a frequency influence of less than 0.5% of the output signal. Not only that, but the symmetrical coil winding technology greatly reduces the phase shift to less than 0.5% when measurements are being retrieved at 1000A.