• Repeatable & reproducible measurements
• Easy to use menu structure; in multiple languages 
• Tough, impact, waterproof & dust resistant; equivalent to IP64 
• Bright LCD colour screen; with ambient light sensor 
• Scratch & solvent resistant display; 2.4” (6cm) TFT
• Calibration certificate
• 2 year gauge warranty
• Automatic rotating display; 0°, 180°
• Data output via USB (Live readings - and batch)
• Data output via Bluetooth® (Model T) 
  
• PC command; start & stop gauge from a PC with live readings (USB only) (Model T)
• Switchable Units (MPa, psi, N, N/mm-2)
• On-Screen Statistics (η, x, σ, hi, lo, COV, N>hi limitǂ)
• Pull Rate Indicator 
  
• Trend Graph 
• Pull Rate Graph (Load v Time)(Model T)
• Interchangeable Dolly Selection; 10, 14.2, 20 & 50mm
• User Selectable Pull Rates; (Model S & Model T Standard Mode):
• 10mm: 1.00, 2.00, 3.00, 4.00, 5.00 MPa/s 125, 200, 400, 600, 725psi/s;
  
• 14.2mm: 0.4, 0.7, 1.4, 2.0, 2.5 MPa/s 60, 100, 200, 300, 360psi/s;
• 20mm: 0.2, 0.3, 0.7, 1.0, 1.2 MPa/s 30, 50, 100, 150, 180psi/s;
• 50mm: 0.04, 0.08, 0.12, 0.16, 0.20 MPa/s 5, 8, 16, 24, 30psi/s.
• User Selectable Pull Rates; (Model T Advanced Mode):
  
• 10mm: 0.40 - 5.60 MPa/s 58 - 812psi/s in 0.1MPa / 1psi steps;
• 14.2mm: 0.20 - 2.80 MPa/s 29 - 403psi/s in 0.1MPa / 1psi steps;
• 20mm: 0.10 - 1.40 MPa/s 15 - 203psi/s in 0.1MPa / 1psi steps;
• 50mm: 0.02 - 0.22 MPa/s 2 - 32psi/s in 0.01MPa / 0.1psi steps.
• User Selectable Limit & Limit Hold Time (Model T)
• Gauge Memory; maximum number of readings 60 (Model S); 60,000* (Model T)
• Number of Batches (Alpha Numeric - Model T) 1 (Model S); 2,500  (Model T)
• Attribute Modes to meet National & International Standards  (Model T)
• Display Modes:
• Readings, Selected Stats & Run Chart (last 20 readings)
• Pull Rate Graphs (Model T)
• Batch Review (Model T)
• Power; Battery (B), AC Mains Power (M) B (Model S); B, M (Model T)
• Power Cable with Multi International Plug Adaptor (UK, EU, US, AUS)(Model T)
• Plastic Transit Case
• Date & Time(Model T)
• In Field Adhesion Calibration Verification Mode

• Certificate: Included
• Pressure Accuracy: ±1% of full scale; Pull Rate Accuracy: ±(2.5% + 0.3 seconds
• Pressure Resolution: 0.01MPa (1 psi);  Pull Rate Resolution: 0.01MPa/s (1psi/s)
• Dolly Diameter: 10mm (0.39”); 14.2mm (0.56”); 20mm (0.76”); 50mm (1.96”)
• Operating Range:  8 to 100 MPa (1200 to 14400 psi); 4 to 50 MPa (600 to 7200 psi); 2 to 25 MPa (300 to 3600 psi); 0.3 to 4 MPa (50 to 580 psi)
• Pull Rate Range: 0.4 - 5.6MPa/s (58 - 812psi/s); 0.2 - 2.8MPa/s (29 - 403psi/s); 0.1 - 1.4MPa/s (15 - 203psi/s); 0.02 - 0.22MPa/s (2 - 32psi/s)
• Gauge Dimensions:  260 x 100 x 66mm (6.3 x 3.9 x 2.6”)
• Actuator Height1: 85mm (3.4”); 85mm (3.4”); 85mm (3.4”); 110mm (4.3”)
• Instrument Weight1:  2.9kg (6.4lb); 2.9kg (6.4lb); 2.9kg (6.4lb); 3.1kg (8.3lb)
• Kit Weight:  6.1kg (13.5lb); 7.3kg (16.1lb)
• Power Suppl:  8 x AA NiMH/Alkaline batteries (16 rechargeable batteries supplied complete with charger) or AC mains power (Model T only)
• Battery Life:  ~200 pulls per charge up to 25MPa (3600psi) at 1MPa/s (150psi/s), recharge time <5 hours

• (1) Elcometer 510 Automatic Adhesion Tester
• (1) Standard Epoxy Adhesive ( 2x15 ml tubes)
• (1) Abrasive Pad
• (16) AA MiMH rechargeable batteries
• (8) Cell battry charger
• (1) Mains power supply (UK, EU, US, AUS) (Model T)
• (1) Shoulder harness 
• (1) Actuator lanyard 
• (1) Transit case
• (1) ElcoMaster software & USB cable
• (1) Calibration certificate (if ordered)
• (1) User Guide
• Additional items in 20mm kit:
• (10) 20mm dollies
• (1) 20 mm dolly standard skirt
• (1) 20 mm dolly cutter & handle
• Additional items in 50mm kit:
  
• (6) 50mm dollies
• (1) 50 mm dolly standard skirt
• (1) 50 mm dolly cutter & handle

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice