• Part Number: MPS1102-220V
• MPS series DC power module
• Compatible with MPS Series Mainframes
• Enables creation of DC Power Supply ideal for ATE system applications
• Offers 100W multi-range output power for meeting various power requirements
• Module synchronization supported for enabling multiple outputs in sequence
• Secure fit into mainframe due to guideposts/engineered mating pins
• Identical modules can be combined in series/parallel to increase maximum voltage/current output
• Multi-range output extends rated power from one point of curve for delivering rated power at wider range of voltage/current limits
• Overvoltage (OVP)/Overcurrent (OCP)/Overtemperature (OTP) protection features protect module from dangerous conditions

• Output Rating:
• Voltage : 32 V
• Current : 9.5 A
• Load Regulation (1) ± (% output + offset):
• Voltage: 0.01% + 3 mV
• Current : 0.1% + 3 mA
• Line Regulation ± (% output + offset):
• Voltage : 0.01% + 3 mV
• Current : 0.1% + 3 mA
• Ripple and Noise (20 Hz to 20 MHz):
• Normal Mode Voltage p-p:  5 mV
• Normal Mode Voltage  rms: 1 mV
• Normal Mode Current  rms: 3 mA
• Programming / Readback Resolution:
• Voltage : 1 mV
• Current : 1 mA
• Programming / Readback Accuracy ± (% output + offset):
• Voltage : 0.03% + 13 mV
• Current : 0.1% + 5 mA
• Temperature Coefficient per °C:
• Voltage : 6.4 mV / °C
• Current : 1.6 mA / °C
• Output Response Time (2):
• Rise Time: Full Load: 10 ms, No Load : 10 ms
• Fall Time: Full Load: 10 ms, No Load: 250 ms
• Transient Response (3):
• Time : 0.5 ms
• Protection:
• OVP: Range : 35.2 V, Accuracy : 320 mV
• OCP: Range : 10.45 A, Accuracy : 95 mA
• General: 
• Temperature Ratings: Operation:  32 °F to 104 °F (0 °C to 40 °C), Storage:  14 °F to 158 °F (-10 °C to 70 °C)
• Warranty : 3 Years
• Safety:  Low Voltage Directive (LVD) 2014/35/EU, EN61010-1:2010, cTUVus certification mark (4) fulfills US (UL 61010-1:2012) and Canadian (CAN/CSA-C22.2 NO. 61010-1-12) safety standards
• Electromagnetic Compatibility : EMC Directive 2014/30/EU, EN61326-1:2013
• Dimensions (W x H x D):  3" x 1.7" x 12.4" (75.4 x 42.6 x 316 mm)
• Weight 2.8 lbs:  (1.25 kg)
• Standard Accessories: Certificate of calibration
• (1) With remote sense terminal connected.
• (2) From 10% to 90% or from 90% to 10% of total voltage excursion.
• (3) Time for output voltage to recover within 0.5% of its rated output for a load change 50-100% of full load
• (4) Tested and certified by a Nationally Recognized Testing Laboratory (NRTL), accredited by OSHA

• (1) MPS1102 -Multi-Range DC Power Supply Module, 32V/9.5A/100W (MPS1102)
• (1) Certificate of Calibration
• Note: mainframe sold separately (required for operation)

Brochure/Data Sheet

Instruction Manual

New DC Power Supply Operating Software (Supports Windows® 10 and 11), Ver. V1.0.5

DC Power Supply Operating Software w/ LabVIEW 2022 Run-Time Engine (Supports Windows® 10 and 11)V1.0.5

Note: Prices are not binding at any time subject to change without prior notice