• Includes Hart application
• Includes Device Communicator Plus module
• Product Certifications: ATEX, CSA (US/Canada) and IECEx Intrinsically Safe (includes FISCO as applicable)
• Wireless capability
• Includes 1 Year of Premium Support
• Includes Carrying Case
• Microprocessor: 800 MHZ ARM Cortex A8/NXP
• Memory: Internal Flash 2 GB NAND and 32 GB extended flash
• RAM: 512 MB DDR3 SDRAM
• Display: 5.7 in color VGA resistive touchscreen
• Battery Operating Time: 8+ hours of typical use
• Operating Temperature: -4 to 122°F
• Enclosure Rating: IP54
• Shock Tested to survive a 1-meter drop test onto concrete
• Power the loop functionality
• Quickly resolve field devices issues with advanced diagnostics
• Configure and test valves inline
• Intrinsically safe
• Automatically synchronize field data with AMS Device Manager
• Upgrade software and apps online

Processor, Memory, and Operating System

• Microprocessor 800 MHz ARM Cortex A8 / NXP
• Memory Internal Flash 2 GB NAND and 32 GB extended flash
• Operating System Windows Embedded Compact 2013
• RAM 512 MB DDR3 SDRAM

Physical

• Weight Approximately 2.9 lbs (1330 grams)
• Display 5.7 inch (14.5 cm) color VGA resistive touchscreen
• 640 x 480 pixel
• Keypad X button – similar to a Back key
• 4 arrow buttons to navigate menus
• Checkmark- similar to an Enter key

AC Adapter

• Battery Rechargeable Lithium- Ion Power Module
• Operating Time 8+ hours of typical use
• Charge Time 3 to 4 hours
• LEDs 6 LEDs. Five LEDs for indicating the progress of charging. One LED to indicate the AC
• adapter is charging the power module.
• Battery Charger Options Input voltage 100-240 VAC, 50-60 Hz
• Cables included with US, EU, UK, and AU plugs

Connections

• USB Micro USB Connector. USB 2.0
• Remove the USB cable from the Trex unit before connecting to a device.
• Battery Charger Barrel Round Plug Tip
• Wireless Approvals FCC, CE, RED and IC Approvals
• Certified for use in over 100 countries
• Bluetooth 2.1
• Range up to 10 m
• Wi-Fi 802.11 b/g/n
• Range up to 33 m
• NFC Active NFC
• Range up to 20 mm

Device Communicator Communication Module
HART terminal Enables HART device communication

• Connectors: Two Banana Jack Plugs
• Fieldbus (FF) terminal Enables Foundation Fieldbus device communication
• Connectors: Two Banana Jack Plugs
• Device Communicator Plus Communication Module
• HART terminal
• Enables HART device communication
• Connectors: Two Banana Jack Plugs
• Optional Internal Resistor: 250 or 500 Ohm
• HART + pwr terminal:
• Enables HART communication with the Trex unit, and provides power to one HART device in a bench setup.
• Connectors: Two Banana Jack Plugs
• Includes HART power supply, resistors (167 Ohm), current control, and ammeter.
• Current Range: 3 -22.5 mA
• mA terminal (external ammeter):
• Measures current on a 4-20 mA current loop.
• Connectors: Two Banana Jack Plugs
• Current Range: Up to 22.5 mA
• Resolution: 0.1 mA
• Fieldbus (FF) terminal
• Enables Foundation Fieldbus device communication
• Connectors: Two Banana Jack Plugs
• FF + FF pwr terminal:
• Provides power to one Foundation Fieldbus device in a bench setup.
• Connector: One Banana Jack Plug ( Power conditioner included)
• Current Range: 0- 38 mA

Environmental

• Usage -20°C to +55°C (-4°F to 131°F).
• For IS approval: -20°C to +50°C (-4°F to 122°F)
• Charge +10°C to +45°C (50°F to 113°F)
• Storage with power module -20°C to +50°C (-4°F to 122°F) (less than 1 month)
• Storage without power module -20°C to +60°C (-4 °F to 140°F)
• Enclosure Rating IP54
• Shock The unit shall survive a 1-meter, all sides and corners drop test onto concrete.

• (1) Carrying Case
• (1) Li-Ion Power Module
• (1) Hart application
• (1) Device Communicator Plus Module
• (1) CSA Certification
• (1) ATEX Certification
• (1) IECEx Intrinsically Safe Certification
• (1) Bluetooth radio
• (1) WiFi radio
• (1) NFC radio
• (1) Year of Premium Support

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice