The WirelessHART ® Provisioning Application allows you to provision a WirelessHART network in less time, with less chance of error, and in a more secure manner. This app eliminates the need to open each device description, allowing you to enter the same network ID and Join key once per network instead of for each device, thereby eliminating the need to open each Device Descriptor. Then, configure hundreds of devices with the push of a button, increasing accuracy and enabling you to provision your entire network up to 6x faster. This equates to approximately 84% time savings or the ability to provision more than 6X the number of devices in a given time. Setting Up a Network: Provisioning wireless devices can be a tedious, repetitive process and prone to errors if you don't have the right tools. While provisioning is required for devices to join a network securely, the process involves manually entering a 5-character network ID and a 32-character composite key – for each device. This process may take several minutes per device. Using the WirelessHART Provisioning application for the AMS Trex Device Communicator, enter the network ID and join key before you enter the field, then connect to each device, and press send. With this app, this process only takes a few seconds per device.