TECHNO-AC Success AG-319 N [SUCCESS AG-319 N] Pipe and Cable Locator

High tech kit with multi-frequency transmitter for buried utilities detection in the difficult conditions.

This Receiver working principle
The Cable and pipe locator Success AG-319N consists of the electromagnetic radiation receiver and transmitter providing for the electromagnetic radiation of the route being detected. According to the signal of the embedded speaker or headphones and using the graphic display indications the operator determines the route location. The receiver is capable of receiving a signal from industrial frequency radiation sources (50/60 Hz) and cathode protection systems (100/120 Hz). These modes are used for detecting the location of cable runs or routes carrying the voltage of the relevant frequency. Cable or pipeline may be the load for generator. The transmitter can be connected to the load either directly (with connecting wires) or with the use of the inductive antenna or inductive clamp providing for contactless (inductive) connection of the utility under examination. Use of the inductive antenna as a load is only possible at the 8,928 Hz frequency (selected automatically at antenna connection).

---

Brief description:

---

• Three modes of operation: "ROUTE”, "GRAPHIC”, “FRIEND-OR-FOE”
• Three inbuilt sensors make omnidirectional antenna showing a direction of a cable or a metal pipeline on LCD
• Inbuilt sensor for digital measurement of the depth and current
• Measured depth is 10 m
• Receiver passive frequency: 50/60, 100/120, Radio, BB
• Receiver active frequency: 512/1024/ 8192 / 32768 Hz
• Sensitivity: 100μA
• Large LCD display with high resolution and adjustable backlight brightness
• Transmitter – 120W, frequency range: 200 to 9999 Hz
• Transmitter AG-120 can be used with any receiver

---

Application:

---

• Detection of cables and any metal pipelines underground up to 10 m
• Direct digital measurement of the depth up to 10 m
• Indication of the deviation from the utility axis in the mode “ROUTE”
• Direct digital measurement of the current
• Survey the ground before the excavation works
• Distance of tracing from the place of transmitter connection is up to 10 km