×
Multiple Product

have been added to your cart

There Are items in your cart.

Cart Subtotal: $xxx.xx

Go to checkout
  • Chauvin Arnoux PAC Series AC/DC Clamp Meter Adapter

Chauvin Arnoux PAC Series AC/DC Clamp Meter Adapter

Not yet rated Write a review
Chauvin Arnoux

Available Options

Rp.12.290.654
Availability:
2 - 4 WEEKS
Product Code:
P011201
Brand:
Chauvin Arnoux
Update Terakhir:
23 Nov 2024
  • Free delivery

  • Money back guarantee

Share

The PAC 10 and PAC 20 Series clamps offer an ergonomic design and high-performance technical specifications making them extraordinarily simple to use. The PAC models can be used to measure direct or alternating, sinusoidal or distorted currents with or without a DC component. The result of considerable study in the field, the PAC Series is available with 2 specific jaw shapes. Hooked up to a multimeter, logger, oscilloscope, etc., the PAC clamp simplifies measurement of all currents, without any risk and without shutting down the installation.  As soon as a PAC clamp is powered up, a LED indicates that it is in operation, that an external power pack is connected and that the standby mode is activated (green colour) or deactivated (orange colour). Before any current measurements, you must adjust the DC Zero which can be done instantaneously by simply pressing with your thumb.  If the current measured is too high, a red LED flashes. If the clamp is no longer in use, it shuts down automatically. The automatic poweroff function can be deactivated. For intensive use or to record measurements over a long period, the PAC clamp can be powered by an external 5  Vdc power pack via its µUSB connector. If the external power source cuts out temporarily, the battery takes over.

There are no reviews for this product.

Write a review

  • Power, DC Zero Adjustment and Range
  • Overrun LEDs
  • Deactivatable automatic power-off
  • Extra electrical safety for
  • measurements in the field
  • Double power supply: battery &
  • standard external 5 Vdc power pack

  • Measurement range(s):
  • PAC15: 0.5 .. 400 A AC RMS 0.5 .. 600 A DC
  • PAC16: 0.5 .. 40 A AC RMS 0.5 .. 60 A DC 0.5 .. 400 A AC RMS 0.5 .. 600 A DC
  • PAC17: 0.5 .. 40 A AC RMS 0.5 .. 60 A DC or peak 0.5 .. 400 A AC RMS 0.5 .. 600 A DC or peak
  • PAC25: 0.5 .. 1000 A AC RMS 0.5 .. 1400 A DC
  • PAC26: 0.5 .. 100 A AC RMS 0.5 .. 150 A DC 0.5 .. 1000 A AC RMS 0.5 .. 1400 A DC
  • PAC27: 0.5 .. 100 A AC RMS 0.5 .. 150 A DC or peak 0.5 .. 1000 A AC RMS 0.5 .. 1400 A DC or peak
  • Bandwidth (1):DC .. 30 kHz (-3 dB)
  • Sensitivity: PAC15: 1 mV/A; PAC16: 10 mV/A; PAC17: 10 mV/A; PAC25: 1 mV/A; PAC26: 0.5 10 mV/A 1 mV/A; PAC27: 0.5 10 mV/A 1 mV/A
  • Best accuracy (2): PAC15: 1.5 % + 1 mV; PAC16: 1.5 %; PAC17: 1.5 %; PAC25: 1.5 % + 1 mV; PAC26: 1.5 %; PAC27: 1.5 %
  • Output connector: PAC15, PAC16, PAC17, PAC25, PAC26: Ø 4 mm isolated elbowed male safety plugs; PAC27: Isolated male BNC
  • PAC16: Ø 4 mm isolated elbowed male safety plugs
  • Length of built-in cable: PAC15: 1.5 m; PAC16: 1.5 m; PAC17: 2 m; PAC25: 1.5 % + 1 mV; PAC26: 1.5 m; PAC27: 2 m
  • Admissible load of measuring instrument: ≥ 1 MΩ / ≤ 100 pF
  • Power supply: 9 V battery / 5 V DC µUSB type B
  • Battery life (3): 50 hours typical
  • Specific functions: 
  • Standby function: automatic deactivatable
  • DC Zero : Automatic
  • LED indications : External power supply / Battery status Standby status Measurement capacity overrun DC Zero acknowledgement
  • Maximum conductor diameter: PAC15, PAC16, PAC17: Cables: Ø 30 mm / Busbars: 50 x 10 mm; PAC25, PAC26, PAC27: Cables: Ø 39 mm / Busbars: 50 x 12.5 mm
  • Dimensions: PAC15, PAC16, PAC17: Cables: 224 x 97 x 44 mm; PAC25, PAC26, PAC27: Cables: 236 x 97 x 44 mm
  • Weight: PAC15, PAC16, PAC17:440 g with battery; PAC25, PAC26, PAC27: 520 g with battery
  • Climatic conditions:
  • Operation: -10 °C to +55 °C / < 85 % RH
  • Storage : -40 °C to +80 °C / < 85 % RH
  • Compliance with standards:
  • Electrical safety : IEC 61010-1 & IEC 61010-2-032 600 V CAT III / 300 V CAT IV
  • Electromagnetic compatibility : IEC 61326-1
  • Self-extinguishing capability: Jaws and casing: UL94 V1
  • (1) depending on current value - (2) Best uncertainty in % of output signal - (3) on battery

  • (1) PAC clamp
  • (1) 9 V battery
  • (1) User's manual in 5 languages (F, GB, D, I, E)
  • (1) Safety datasheet (20 languages)
  • (1) Verification certificate.

Download

Note: Prices are not binding at any time subject to change without prior notice


  Options 0 Item Selected
Image
Model
Product Name
Price
Available
Quantity
Chauvin Arnoux PAC 15 [P01120115] 400A AC/600A DC AC/DC Clamp Meter Adapter
P01120115
Rp.12.290.654
2 - 4 WEEKS
Chauvin Arnoux PAC 16 [P01120116] 40 AAC/60ADC - 400 AAC/600ADC AC/DC Clamp Meter Adapter
P01120116
Rp.13.223.623
2 - 4 WEEKS
Chauvin Arnoux PAC 17 [P01120117] 40 AAC/60 ADC - 400 AAC/600 ADC AC/DC Clamp Meter Adapter
P01120117
Rp.13.534.612
2 - 4 WEEKS
Chauvin Arnoux PAC 25 [P01120125] 0.5A - 1,000A AC/ 0.5A - 1,400A DC AC/DC Clamp Meter Adapter
P01120125
Rp.14.694.262
2 - 4 WEEKS
Chauvin Arnoux PAC 26 [P01120126] 0.5 - 1000A AC/ 0.5 - 1400A DC AC/DC Clamp Meter Adapter
P01120126
Rp.15.542.594
2 - 4 WEEKS
Chauvin Arnoux PAC 27 [P01120127] 0.5 - 1000A AC/ 0.5 - 1400A DC AC/DC Clamp Meter Adapter
P01120127
Rp.16.305.962
2 - 4 WEEKS