• Part Number: 114620
• Full Scale range: 200 m (656.2 ft.) 
• High accuracy conductivity readings
• 6 pressure ranges available
• Excellent corrosion resistance
• 100,000 sets of readings
• 8 year battery life
• 3 year warranty
• Versatile Conductivity Datalogger:
• Compatible with Levelogger Software, accessories and telemetry
• Ideal for salinity and saltwater intrusion studies, tracer tests, agricultural and stormwater run-off monitoring
• Upgraded Features:
• Increased memory: 100,000 sets of data
• More stable communication: single-eye optical, easy to clean, more scratch resistant
• Stronger, robust design: double o-ring seals for two times over pressurization rating
• Better thermistor and conductivity sensitivity: upgraded platinum RTD and conductivity sensor
• Superior protection in harsh conditions: baked-on coating using polymerization—inside and out

• Level Sensor: Piezoresistive Silicon Pressure Sensor:
• Ranges: 5, 10, 20, 30, 100, and 200 m
• Accuracy: ± 0.05% FS
• Resolution: 0.001% FS, 0.0006% FS
• Normalization: Automatic Temperature Compensation
• Temp Comp. Range: 0ºC to 50ºC
• Temperature Sensor: Platinum Resistance Temperature Detector (RTD):
• Accuracy: ± 0.05ºC
• Resolution: 0.003ºC
• Conductivity Sensor: 4-Electrode Platinum:
• Full Range: 0 to 100,000 µS/cm
• Calibrated Range: 50 to 80,000 µS/cm
• Accuracy: ±1% 5,000 µS/cm - 80,000 µS/cm;
• greater of ±2% or 15 µS/cm from 50 µS/cm - 5,000 µS/cm
• Resolution: ± 0.1 µS/cm
• Normalization: Specific Conductance normalized to 25ºC for full range
• User Calibration Points: 1413, 5000, 12,880, 80,000 µS
• General: 
• Battery Life: 8 years (based on 1 reading every 5 minutes)
• Clock Accuracy (typical): ± 1 minute / year
• Operating Temperature: -20ºC to 80ºC
• Memory: Continuous or Slate Mode
• Maximum Readings: 100,000 sets of readings
• Communication Speed: 9600 bps, 57,600 bps with USB
• Com Interface: Optical high-speed: USB, SDI-12
• Size: 22 mm x 208 mm (7/8" x 8.2")
• Weight: 200 grams (7.1 oz)
• Corrosion Resistance: Baked-on coating using polymerization technology (inside and out)
• and superior corrosion resistant Hastelloy pressure sensor
• Wetted Materials: Delrin, Viton, 316L Stainless Steel, Hastelloy, Platinum, PFAS-free PTFE
• Sampling Mode: Linear, Event & User-Selectable Schedule with Repeat Mode,
• Future Start, Future Stop, Real Time View
• Measurement Rates: 2 seconds to 99 hours
• Barometric Compensation: High accuracy, air-only, Barologger

• (1) 114620 -LTC Water Level & Conductivity Logger, 200 m (656.2 ft.) 
• (1) Instruction Manual
• NOTE: Requires a deployment option (either a direct read or a suspension cable) and a communications kit to download data

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice