• Part Number: TIH 030M/230V
• Voltage, V/Hz: 230V/50-60Hz
• Work piece: Maximum weight: 40 kg (88 lb); Maximum bore diameter: 20 - 300 mm (0.8 - 11.8 in.)
• Maximum temperature (approx.): 400 °C (750 °F)
  
• Compact lightweight design; just 20,9 kg (46.0 lb) facilitating portability
• 2-step power setting and smaller yokes allow heating smaller bearings safely and at lower power consumption>
• Capable of heating a 28 kg (61.7 lb) bearing in just 20 minutes
• Temperature mode pre-set at 110 °C (230 °F) to help prevent bearing over-heating
• Automatic demagnetisation
• This induction heating system is warranted for 3 years
• 230V, Non-US version does not include a finished plug.

• SKF m20 performance: 28 kg (61.7 lb)
• Voltage, V/Hz: 230V/50-60Hz; 100-110V/50-60Hz
• Work piece: Maximum weight: 40 kg (88 lb); Maximum bore diameter: 20 - 300 mm (0.8 - 11.8 in.)
• Temperature control; Range: 0 - 250 °C (32 - 482 °F); Magnetic probe: Yes, K-type; Accuracy (electronics): ± 2 °C (± 3.6 °F)
• Time control Range: 0 - 60 minutes; Accuracy: ± 0,01 sec.
• Maximum temperature (approx.): 400 °C (750 °F)
• Thermometer mode: Yes
• Bearing mode: Yes
• Power setting: 2-step; 50% or 100%
• Demagnetisation according to SKF norms (automatic): Yes (<2 A/cm)
• Can heat sealed bearings: Yes
• Can heat pre-greased bearings: Yes
• Error guiding codes: Yes
• Thermal overload protection: Yes
• Control panel: Control panel and LED display integrated in remote controle
• Operating area (w x h): 100 x 135 mm (3.9 x 5.3 in.)
• Coil diameter: 95 mm (3.7 in.)
• Dimensions (w x d x h): 450 x 195 x 210 mm (17.7 x 7.6 x 8.2 in.)
• Total weight, including yokes: 20,9 kg (46.0 lb)
• Maximum power consumption: 2,0 kVA
• Standard yokes: 45 x 45 x 215 mm (1.7 x 1.7 x 8.4 in.), for heating bearings with bore diameter of 65 mm (2.6 in.) and larger.; 28 x 28 x 215 mm (1.1 x 1.1 x 8.4 in.), for heating bearings with bore diameter of 40 mm (1.6 in.) and larger.; 14 x 14 x 215 mm (0.5 x 0.5 x 8.4 in.), for heating bearings with bore diameter of 20 mm (0.8 in.) and larger.
• Core cross section: 45 x 45 mm (1.7 x 1.7 in.)
• Bearing support arms: Yes, foldable
• Yoke storage: Yes, internal integrated in foldable bearing support arms
• Cooling fan: No
• Swivel arm: No
• Housing material: Steel and glass filled polyamide
• Warranty period: 3 years

• (1) TIH 030M/230V - Small Induction Heater, 230V
• (1) TIH 030-Y2 Yoke 14 x 14 x 215 mm
• (1) TIH 030-Y4 Yoke 28 x 28 x 215 mm
• (1) TIH 030-Y7 Yoke 45x 45 x 215 mm

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice