• One year capacity - both logger and battery supply
• One minute time/date stamp resolution
• Will fit inside any RainWise gauge
• Nonvolatile memory
• Powered by two AAA alkaline batteries
• Windows software included

RainWise RainLog 2.0 Rainfall Data Logger

• Power Specification: Two 1.5V AAA Batteries
• Battery Life: > 12 Months Lithium
• >12 Months Alkaline (temperature dependent)
• Clock Accuracy: ±1min/month
• Communications: USB 2.0
• Maximum Input Frequency: 100 Hz
• Minimum Pulse Width: 10 ms
• Logging Interval 60 seconds
• OPERATING ENVIRONMENT:
• Temperature: -40 ~ 60°C with Lithium Batteries;  -18 ~ 55°C with Alkaline Batteries
• Humidity: 0 ~ 100% Non-Condensing

Rainfall Gauge

• The 8” collector meets NWS specifications for statistical accuracy selfemptying.
• Each tip of the bucket shows 1/100th of an inch on the indoor LCDdisplay.
• Hand calibrated
• A built in bubble level allows for accurate installation
• The display will indicate up to 9.99” of rain.
• A simple button allows you to reset counter to zero after each rainfall.
• A long-life lithium battery is included.
• 2 year warranty on data logging and transmission
• Lifetime warranty on collector
• Housing: High Impact Polypropylene, UV Inhibited
• Transducer: Tipping Bucket of specially formulated
•  plastic for low surface tension
• Switch: Dry reed switch
• Output: Less than 0.1 sec. switch closure
• Capacity: 6 to 24 VDC @ 500ma
• Resolutions Available: 0.01 inches
• Accuracy: 2% at 1.5” per hour

• (1) RainLog 2.0 Data Logger
• (1) USB Cable
• (2) AAA Batteries
• (1) RL-Loader Software CD
• (1) Universal Connector
• (1) Quick Start Guide
• (1) Desiccant Bag
• (1) Rain Gauge 

Brochure/Datasheet

Instruction Manual

Software: RL-Loader 2.4 Software

Note: Prices are not binding at any time subject to change without prior notice