• Fast, accurate reading rate; 60+ readings per minute
• Repeatable & reproducible measurements
• Easy to use menu structure; in 30+ languages
• Tough, impact, waterproof & dust resistant; equivalent to IP54
• Bright colour screen; with automatic rotating display (0°, 90°, 180° & 270°)
  
• Scratch & solvent resistant display; 2.4” (6cm) TFT
• USB power supply; via PC
  
• Test certificate & 2 year gauge warranty1
• Ambient light sensor; with adjustable auto brightness
• Automatic probe recognition
  
• Gauge software updates2; via ElcoMaster® software
• Data Output
• USB; to computer
• Bluetooth®; to computer, Android™ & iOS3 devices  (ModelT) 
• Measurement units; μm, mm, mils, inch
• Signal strength indicator
• User selectable reading resolution; Low & High reading resolution
• Display modes; user selectable (ModelT) 
• Readings
• Readings & differential; reading and the offset from a set nominal difference (ModelT) 
• Bar Graph (ModelT) 
  
• Live reading trend graph; in Batch Mode (ModelT) 
• Run chart; trend graph of last 20 readings (ModelT) 
• User Selectable Statistics;
• Number of readings; η, Mean (average); x,Number of readings; η, Mean (average); x, Standard deviation; σ, Highest reading; Hi, Lowest reading; Lo, Coefficient of variation; CV%
• Nominal dry film thickness; NDFT, High & low limits; definable audible & visual alarms, Number of readings above high limit; Number of readings below low limit; Range; I (ModelT) 
• Multiple calibration methods with on screen instructions; in 30+ languages
  
• Material selection; preset choice of materials or create own user defined materials
• Velocity entry; direct entry of a material’s sound-velocity
• 1 Point; using a coating sample of known thickness
• Calibration lock; with optional PIN Code Unlock
• Gauge memory; number of readings, 100,000 (ModelT) 
• Number of batches; with unique calibrations, 1,000  (ModelT) 
• Alpha-numeric batch names; user definable on the gauge (ModelT) 
• Fixed Batch Size Mode; with batch linking (ModelT) 
  
• Batch review graph (ModelT) 
• Delete last reading
• Limits; 40 user definable audible & visual pass/fail warnings (ModelT) 
• Live Reading Mode; transfer of individual readings to external device, USB (Model B), USB & Bluetooth  (ModelT) 
• Reading save function
• Date & time stamp (ModelT) 
• Scan Mode (ModelT) 
• ElcoMaster® software & USB cable  (ModelT) 
• Protective case  (ModelT) 
  
• Plastic transit case  (ModelT) 

• Operating Temperature:  -10 to 50°C (14 to 122°F)
• Power Supply: 2 x AA batteries (rechargeable batteries can be used)
• Battery Life Alkaline: Approximately 15 hours Lithium: Approximately 28 hours
• Gauge Weight: 161g (5.68oz) including batteries, without transducer
• Gauge Dimensions: 141 x 73 x 37mm (5.55 x 2.87 x 1.46”) without transducer

• Elcometer 500 Coating Thickness Gauge Model B & T:
• (1) Elcometer 500 Coating Thickness Gauge
• (1) 4ml (0.14fl oz) bottle of probe tip oil
• (1) 120ml (4fl oz) bottle of ultrasonic couplant
• (2) AA batteries
• (1) Protective case
• (1) Transit case (Model T)
• (1) Wrist harness
• (3) Screen protectors
• (1) ElcoMaster® software (Model T)
• (1) USB cable (Model T)
• (1) Test certificate
• Elcometer 500 Coatings on Concrete Inspection Kit:
• (1) Elcometer 500 Model T Coating Thickness Gauge
• (1) C1 & C2 coating thickness probes, C1 & C2 probe measurement foils: 1, 2, 3 & 8mm (40, 80, 120 & 310mils)
• (1) Elcometer 456 Model B Ferrous Integral Gauge
• (1) Elcometer 456 calibration foils: 0.5 & 1.5mm (20 & 60mils)
• (2) Coating calibration moulds, 120ml (4fl oz) bottle of ultrasonic couplant
• (1) 4ml (0.14fl oz) bottle of probe tip oil
• (1) Transit case
• (1) ElcoMaster® software & USB cable

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice