• Measures AC/DC voltage up to 1000V, AC/DC current, resistance, frequency, capacitance, temperature, and  duty cycle
• Dual thermocouple takes simultaneous temperature readings on low and high side of an HVAC system
• Low pass filter accurately measures voltage on variable frequency drives
• Non-contact voltage detection enhances safety
• Audible continuity quickly identifies shorts and opens
• Diode test to verify diode polarity
• Data hold freezes the reading on the display for further analysis
• Peak hold (crest) captures and holds the peak value of a voltage or current surge
• MIN/MAX recording records min/max measurements over time to show voltage fluctuations
• Relative zero mode displays the difference between the actual reading and a stored reference value and may be used with any function or range
• CAT IV 600V/CAT III 1000V safety rated for high voltage environments

AC Voltage

• Range: 6.000 V, 60.00 V, 600.0 V, 1000 V
• Accuracy: +/- (1.0 % rdg + 3 LSD)@ 45 Hz to 400 Hz, 0 V to 600 V

DC Voltage

• Range: 600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
• Accuracy: +/- (0.5% rdg + 2 LSD) @ 6 V to 600 V ranges

AC Current:

• Range: 600.0 μA, 6000 μA,60.00 mA, 500.0 mA,10.00 A
• Accuracy:  ±(1.2% Rdg + 5 LSD) @ 600 μA to 6000 μA ranges, 45 Hz to 400 Hz

DC Current:

• Range: 600.0 μA, 6000 μA, 60.00 mA, 500.0 mA, 10.00 A
• Accuracy: ±(1.0% Rdg + 2 LSD) @ 600 μA to 6000 μA ranges

Frequency:

• Range: 60.00 Hz, 600.0 Hz, 6.000 kHz, 60.00 kHz, 600.0 kHz, 6.000 MHz, 60.00 MHz
• Accuracy:  +/- (0.1% rdg + 3 LSD)

Resistance:

• Range; 600.0 Ω, 6.000 kΩ, 60.00 kΩ, 600.0 kΩ 6.000 MΩ 60.00 MΩ
• Accuracy: +/- (1.0% rdg + 2 LSD) @ 6 kΩ to 600 kΩ ranges

Capacitance:

• Range: 60.00 nF, 600.0 nF, 6.000 μF, 60.00 μF, 600.0 μF, 6000 μF, 60.00 mF
• Accuracy:  +/- (3.0% rdg + 5 LSD) @ 600 nF to 60 μF ranges

Temperature:

• Range: 40 ⁰F to 1832 ⁰F -40 ⁰C to 1000 ⁰C
• Accuracy:  +/- (1.0% rdg + 12) @ >104 ⁰F to 752 ⁰F +/- (1.0% rdg + 8) @ >40 ⁰C to 400 ⁰C
• Number of temperature inputs: Dual Thermocouple

Duty cycle:

• Range: 10.00% to 90.00%
• Accuracy: +/- (1.2% rdg + 30 LSD) @ 5 Hz to 2 kHz

NOTE: For detailed specifications please see Brochure/Datasheet

• (1) 9V (6F22) x1 battery installed
• (1) Test leads
• (2) Type-K probe
• (1) Temperature adaptor
• (1) Velcro strap
• (1) Carrying case
• (1) Users manual

Brochure/Datasheet

Instruction manual

Download

Note: Prices are not binding at any time subject to change without prior notice