AEMC 1246 [2121.73] Thermo-Hygrometer/Data Logger. The Thermo-Hygrometer Data Logger Model 1246 is a portable, compact digital meter designed for simplicity and one-hand operation. The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using supplied DataView® software. The meter uses an NTC as the temperature sensor, providing excellent response time to changes in temperature, good repeatability and accurate readings. The Model 1246 also utilizes a thin film polymer capacitive type relative humidity sensor as hygrometer sensor, offering excellent recovery from 100% moisture, and fast response time and durability.
Dual line display toggles between any two of the measurements
User selectable temperature units, °F, °C
Built in sensor with removable protective cap
Min, and Max measurements stored
Hold function freezes the display
Spot or continuous recording up to 1 million measurements
Blue luminescent backlit display
Programmable alarms for temperature and humidity through software
USB and Bluetooth communication
Magnetic mount
Battery or USB powered
DataView graphing and analysis software included
Channel: Two with LCD display and Backlight
Input: Sensor: Capacitive for Humidity and semiconductor for Temperature
Relative Humidity:
Measurement Range: 3 to 98.0% RH
Accuracy: ±2%RH + 1 ct (10 to 90%HR); ±4%RH + 1 ct (outside this range)
Resolution: 0.1%RH
Temperature:
Sensor: Semiconductor
Measurement Range: 14.0° to 140.0°F; -10.0° to 60.0°C
Accuracy: 50.0° to 104.0°F: ±2.5°F + 1 ct; 10.0° to 40.0°C: ±0.5°C + 1 ct
Resolution: 0.1°F0.1°C
Dew Point:
Measurement Range: 14.0° to 140.0°Ftd-10.0° to +60.0°Ctd
Accuracy: ±1.8°F >30%, ±2.7°F from 20 to 30%RH±1°C >30%; ±1.5°C from 20 to 30%RH
Resolution: 0.1°F; 0.1°C
Recording:
Manual start/stop on the product
Short press for MEM: spot recording/long press for REC at the defined default rate
Programmed recording: start date, recording interval, and end date defined using DataView® software
Alarm; Alarm threshold settable on teh software / Recording can be triggered on an alarm threshold
MIN-MAX-HOLD: yes
Sampling Rate: Programable from 1s, 2s, 5s, 10s, 20s, 30s, 2min, 5min, 10min, 15min, 30min, and 1hr
Memory: 1,000,000 measurements on each channel (4MB). Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed.
Communication: USB 2.0 and Bluetooth 4.0 BLE range 10m typicall
Power Source: 3x1.5V AA (LR6) alkaline batteries or USB port (micro-USB adaptor offered as an accessory)
Battery Life: 1000 hrs., 3 years when recording with 15 minute intervals
Dimensions: 7.36 x 2.84 x 1.28" (187 x 72 x 32mm)
Weight (with battery): 14.1oz (400g) with batteries
Case: Polycarbonate
Operating Temperature: 14° to 140° F (-10° to 60°C)
Storage Temperature: -4° to 140° F (-20° to 60°C)
Relative Humidity: Up to 90%
Ingress Protection (IP): IP54 with USB connector closed and protective cap in place