Shopping Cart
Your shopping cart is empty!
Cleverscope CS548 4-Ch 200MHz 500 MSa 14-bit Isolated Oscilloscope
Rp.256.685.000
- Availability:
- 4 - 6 WEEKS
- Product Code:
- CS548
- Brand:
- CleverScope
- Update Terakhir:
- 16 May 2023
-
Free delivery
-
Money back guarantee
Ask an Expert
Our tech experts are ready to help!(62) 021-53167044 | 0812-83861970 | 0812-9915277
Email UsThe CS548 is an individually isolated channel high CMRR oscilloscope with four channels. We can supply the unit with fewer channels – from none to three if that is all that is required. It is designed to measure all the signals in an operating full or three phase power electronic switching bridge on both the low and high sides. Examples include gate drives to measure voltage and charge, the power switch to measure loss and parasitic stress, the output to measure power and spectrum for EMC compliance, and the control system for Gain/Phase and stability. The CS5X8 includes an isolated signal generator for stimulus, and two expansion pod connectors for isolated input and output functions. Two CS548's can be slaved to make an 8 channel oscilloscope with coherent sampling. See the selected measurements at the end of the specification section for visual examples of measurements made.
There are no reviews for this product.
- Oscilloscope
- 2kVDC operating isolation voltage to ground and other channels. (Local)
- 30 kV operating isolation voltage to ground and other channels (Cat II), via fibre cable provided minimum ground and probe separation is met. (Remote IsoPod)
- 1 kVAC Cat III rating (local).
- 14 bit resolution, 100dB dynamic range
- Sample Rate 500 MSPS per channel
- 500 M Samples total memory
- 200 MHz BW
- 8 Digital inputs:
- Isolated 1kV DC
- 100 Mbps
- 5 pF to chassis
- 100 kV/us transient immunity
- Logic level threshold voltage using CS1300
- Waveform generator:
- Isolated 880VDC working
- 0 – 65 MHz
- 14 pF to chassis
- 90 dB CMRR at 50 MHZ
- Sine, arbitrary (incl patterns).
- 100uV rms noise
- Communications:
- USB 3-C
- Ethernet SFP socket based
- Copper 10/100/ 1000 Mbps
- Fibre 1Gbps
- SD Card
- Analog Inputs:
- Number of channels: 0 - 4
- Isolation Voltage-Local: 2kVdc Cat III, when connected to mains systems of less than 600V line-neutral
- Isolation Voltage –Remote IsoPod : 30 kVdc
- CMRR: > 120 dB at 1 MHz; > 115 dB at 10 MHz; > 100 dB at 50 MHz
- ADC resolution: 14 bits
- Input Ranges : 0.8V and 8V
- Sample Rate: 500 MSPS * 400 MSPS now
- Sample Memory: 500 M Samples * (installed)
- CM leakage to other channels: <-125dBc
- Channel to Channel Skew: < 144ps
- Cross talk at 10.7 and 30 MHz: < -115 dBc
- RMS Channel Noise 1 M samples: ~ 200 uV rms, 0.8V range; ~ 2mv rms, 8V range
- Pk-Pk Channel noise 1 M samples: 1.8mVp-p for 0.8V range; 15mVp-p for 8V range
- Sample clock jitter: 300 fs rms
- NOTE: For full specifications. Please see Brochure/Datasheet
- (1) 1 off 1x/10x probe, 100x probe
- (1) Common Mode Choke per installed channel
- (1) 2 off CS1301 Input Pods
- (1) USB Cable
- (1) Power Supply
- (1) SMA-BNC adaptor
- (1) Ethernet SFP module (copper or fibre).
Brochure/DatasheetDownload
Note: Prices are not binding at any time subject to change without prior notice
Related products
Rp.75.261.000
