• Part Number: 2129.84
• Measure from 1 microohm (0.1 microohm resolution) to 2500.0 Ohm
• Test current selection of 1mA, 10mA, 100mA, 1A and 10A
• Selectable metal types
• Automatic and manual temperature correction
• Two programmable alarm set points
• Stores up to 1500 test results
• Selectable inductive or resistive test modes
• Automatic multiple test mode (multiple tests without pressing the test button)
• Large multi-line electroluminescent display
• Local or remote test setup and control
• Internal rechargeable batteries conduct up to 5000 - 10A tests
• Rugged, double insulated waterproof case

• Range: 5mΩ; Resolution: 0.1µΩ; Accuracy @ 23°C±5°C: ±(0.15% +1.0µΩ); Measurement Current: 10A; Voltage Drop: 50mV
• Range: 25mΩ: Resolution: 1µΩ; ccuracy @ 23°C±5°C: ±(0.05% +3µΩ); Measurement Current: 10A; Voltage Drop: 250mV
• Range: 250mΩ: Resolution: 10µΩ; Accuracy @ 23°C±5°C: ±(0.05% +30µΩ); Measurement Current: 10A; Voltage Drop: 2500mV
• Range:2500mΩ: Resolution:  0.1mΩ; Accuracy @ 23°C±5°C: ±(0.05% +0.3mΩ); Measurement Current: 1A; Voltage Drop: 2500mV
• Range: 250Ω; Resolution: 10mΩ; Accuracy @ 23°C±5°C:  ±(0.05% +30mΩ); Measurement Current: 10mA; Voltage Drop: 2500mV
• Range: 2500Ω: Resolution: 100mΩ; Accuracy @ 23°C±5°C: ±(0.05% +300mΩ); Measurement Current:1mA; Voltage Drop:2500mV
• Temperature Measurement: 3 wire 100Ω platinum RTD
• Accuracy: ±0.5°C
• Resolution: 0.1°C
• Selectable Metal Type: Yes – Copper, Aluminum or Custom
• Alarm Mode: Yes – 2 Alarms with High-Low trigger
• Storage Memory: 1500 tests, supplied with DataView® software for download and reporting
• Battery: Rechargeable NIMH battery pack 6V, 8.5Ah
• Battery Life: 10A ≥ 5000  tests typical
• Battery Charger: 120/240VAC ± 20% (45 to 400Hz)
• Auto Power OFF: When battery voltage <5.0V
• Overload Protection: 250Vrms
• Dimensions:
• (L x W x H): 10.70 x 9.76 x 7.18” (272 x 248 x 182mm)
• Weight: 8.1 lbs (3.69 kg)
• IP Rating: IP64 (with cover closed) IP53 (with cover open)
• Altitude Operating: 2000 m
• Operating Temperature: 14° to 131°F (-10° to +55°C) & 10 to 80% RH
• Storage Temperature (without battery): -40° to 140°F (-40° to +60°C) & 10 to 90% RH
• Safety: IEC/EN 61010-1 50V CAT III Pollution 2

• (1) RS-232 to USB 2.0 cable
• (1) AC line cord
• (1) Set of 10A Kelvin Clips (1017.84)
• (1) Set of 1A Kelvin Probes Spring Loaded (2118.73)
• (1) Carrying Bag
• (1) DataView software

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice