Fluke 28 II Ex [FLUKE-28IIEX/ETL] Intrinsically Safe True RMS Digital Multimeter

• Intrinsically safe
• True-RMS AC voltage and current for accurate measurements on non linear signals
• Backlit keypad buttons
• Large, 2-level, bright white, LED backlit display
• Hi resolution 20,000 count display mode
• Measures up to 1000 V AC and DC
• Measures up to 10 A (20 A for 30 seconds)
• 10,000 μF capacitance range
• Frequency to 200 kHz
• Extended AC voltage bandwidth 15 Hz - 20 kHz
• Built-in thermometer can take temperature readings without need for separate instruments
• Resistance, continuity and diode test
• Min/Max/Average recording capture variations automatically
• Peak Min/Max
• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
• IP 67 waterproof and dustproof for harsh environments
• Designed to withstand 3 meter drop (with holster)
• Reversible holster for added protection when not in use
• Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits
• Complies with second edition IEC and ANSI electrical safety standards
• Long battery life (800 hours)
• Relative mode removes test lead resistance from low ohms measurements
• Auto and manual ranging for maximum flexibility
• MSHA approved

• DC voltage: Range 0.1 mV to 1000 V; Accuracy ±0.05 % + 1
• AC voltage: Range: 0.1 mV to 1000 V; Accuracy: ±0.7 % +4
• DC current: Range: 0.1 ±A to 10 A; Accuracy: ±0.2 % + 4
• AC current: Range: 0.1 ±A to 10 A; Accuracy: ±1.0 % + 2
• Resistance: Range: Range: 0.1 O to 50 MO; Accuracy ±(0.2 % + 1)
• Conductance: Range: 60.00 nS; Accuracy: ± (1.0 % + 10)
• Diode Test: Range: 2.0 V; Accuracy: ± (2.0 % + 1)
• Duty Cycle: Range: 0.0 % to 99.9 %; Accuracy: Within ±(0.2 % per kHz + 0.1 %) for rise times <1 ±s
• Display counts: 6000 counts/19,999 counts in high-resolution mode
• Capacitance: Range: 10 nF to 9999 ±F; Accuracy: ± (1.0 % + 2)
• Frequency: Range: 0.5 Hz to 199.99 kHz; Accuracy: ± (0.005 % + 1)
• Temperature: Range: -200 °C to +1090 °C (-328 ±F to +1994 ±F); Accuracy: ± (1.0 % + 10) °C [± (1.0 % + 10) ±F]
• Peak Capture: Record transients up to 250 us
• Min/Max/Avg Recording: Display signals up to approximately 100 ms
• Safety certifications: 
  
• ATEX: II 2 G Ex ia IIC T4 Gb; II 2 D Ex ia IIIC T130 °C Db; I M1 Ex ia I Ma
• NEC-500: Class I, Div 1, Groups A-D, 130 °C
• IEXEx: Ex ia IIC T4 Gb; Ex ia IIIC T130 °C Db; Ex ia I Ma
• GOST R Ex (Pending):
• Overvoltage protection: Measurement Category III, 1000V, Pollution Degree 2
• Measurement Category IV, 600V, Pollution Degree 2
• IP rating: IP67
• General Specifications:
• Power: Three AAA batteries
• Battery life: 400 hours
• Display: LCD, with backlight
• External protection Rubber holster
• Warranty: Three years
• Size with holster (HxWxL): 6.35 cm x 10.0 cm x 19.81 cm (2.5 in x 3.93 in x 7.8 in)
• Weight with holster: 698.5 g (1.54 lb)

• (1) Fluke TL75 SureGrip Silicone Test Leads
• (1) Fluke AC72 Alligator Clips
• (1) Red Holster
• (1) 9V battery (installed)
• (1) Getting Started Manual
• (1) CD with detailed Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding , subject to change without prior notice