• True-rms technology improves accuracy in electrically noisy environments
• Measures AC/DC voltage up to 600V, AC/DC current, resistance, frequency, capacitance, and temperature
• Non-contact voltage detection enhances safety
• Audible continuity quickly identifies shorts and opens
• Diode test to verify diode polarity
• Data hold freezes the reading on the display for further analysis
• MIN/MAX recording records min/max measurements over time to show voltage fluctuations
• Relative zero mode displays the difference between the actual reading and a stored reference value and may be used with any function or range
• Combines user friendly features such as, auto power-off to conserve battery life, low battery warning, a "third hand test probe holder, built-in test leads storage, a built-in flashlight, and a Velcro strap to hang the meter
• Auto and manual-ranging delivers maximum flexibility
• Backlit LCD display with analog bar graph makes it easy to view results
• CAT III 600V safety rated

• Number of temperature inputs: Single Thermocouple  
• Ambient temperature:  73.4°F ±9 (23°C ±5°C); Relative temperature: ≤75%
• Accuracy: ±(% of reading + digits)
• Maximum voltage between input terminal and earth ground: AC 750Vrms or DC 1000V
• Fuse for mA ?A input: F1 fuse, 0.5A H 1000V fast-fuse, (Φ6x32)mm
• Fuse for 10A input: F2 fuse, 11A H 1000V fast-fuse, (Φ10x38)mm
• Maximum display: Digital 3999 counts, updates 3/sec. Frequency: 9999 counts.
• Analog pointer display: 41 segments, updates 30 times/sec.
• Over-range indication:  OL
• Range: Automatic and Manual
• Altitude: Operating 2000m
• Operating temperature: 0°C ~ +40°C (32°F ~ 104°F)
• Relative humidity: 0°C ~ +30°C (32°F ~ 86°F) ≤75%; +30°C ~ +40°C (86°F ~ 104°F) ≤50%
• Storage temperature: -10°C ~ +50°C (14°F ~ 122°F)
• Electromagnetic compatibility: In an RF ?led of 1V/m = Speci?ed accuracy 5%
• Battery: 9V, 6F22, NEDA1604 or equivalent
• Dimensions (L x W x H): 182 mm x 90 mm x 45 mm (7.2 in x 3.5 in x 1.8 in)
• Weight: Approx. 354g (0.78lb) with batteries installed

DC Voltage Measurement: 

• Input impedance: About 10M ; (Input impedance is ≤3Ge except DC 400mV range)
• Overload protection: ±1000V

AC Voltage Measurement: 

• Note: Manual range only for 400.0mV range.
• Input impedance: Around 10MΩ
• Frequency response: 45Hz ~ 400Hz
• AM-520 / AM-520-EUR: Average sensing, rms indication.
• AM-530 / AM-530-EUR : True RMS.
• Overload protection: 750Vrms

Resistance Measurement: 

• 400Ω range: Measured value = (Measured display value - Short-circuiting value of probe)
• Open circuit voltage: Around 0.5V
• Overload protection: 750Vrms

Circuit ON/OFF and Diode measurement: 

• Overload protection: 1000V

Capacitance Measurement: 

• Overload protection: 1000V

Frequency Measurement:

• Overload protection: 750Vrms

DC Current Measurement: 

• Overload protection:mA /µA range:F1 fuse, 0.5A H 1000V fast-fuse, (Φ 6x32)mm
• 10 A range:F2 fuse, 11A H 1000V fast-fuse, (Φ10x38)mm

AC Current Measurement

• Frequency response: 45Hz ~ 400Hz
• AM-520 / AM-520-EUR: Average sensing, rms indication.
• AM-530 / AM-530-EUR : True RMS.

Overload protection

• mA /?A range: F1 fuse, 0.5A H 1000V fast-fuse, (Φ6x32)mm
• 10 A range: F2 fuse, 11A H 1000V fast-fuse, (Φ10x38)mm

Temperature Measurement

• Overload protection: 1000V

NOTE: For detailed specifications please see Brochure/Datasheet

• (1) 9V(6F22) x1 battery installed
• (1) Test leads
• (1) Type-K Probe x 1
• (1) Velcro strap Carrying case
• (1) Users manual

Brochure/Datasheet

Instruction manual

Download

Note: Prices are not binding at any time subject to change without prior notice