• RECEIVER:
• Precision Locator and PCM in one unit
• Accurate, high over-sampled measurements, 96000 Samples/sec
• 8kHz Fault Find
• Improves fault indication integrity
• Minimizes unnecessary excavations
• Identification of pickup/discharging from 3rd party CP Systems
• Low power for full day survey (2 x D Cells)
• Current mapping:
• Quicker 3 Second current Mapping and up to 1000 measurements stored on PCM+ receiver.
• If PDA has GPS then software automatically includes xyz and time stamp for inclusion in graph.
• Integrates with standard GIS software.
• Realtime upload of measured data via Bluetooth to PDA or PC using Radiodetection PCM+ software application, presents recorded data in graphical or raw data format. 
• PC / PDA graph display Modes (against distance):
• Locate depth
• ACCA PCM current (mA and dBmA)
• Phase
• ACVG
• Position (using GPS) 
• TRANMITTER:
• One portable case
• Easy to use
• High power 150 Watt
• 19 miles range @ 4Hz
• New programmable, digital processor based for reliability
• Improved overload protection
• Negative drive voltage
• Optional switch around zero for full power limited duration
• Improved environmental sealing
• The Bluetooth word mark and logos are registered trademarks of Bluetooth SIG, Inc. and any use of such marks by Radiodetection is under license.

• Carry Bag Options:
• 10/PCMX25KIT-H Hard Bag
• 10/PCMX25KIT Soft Bag

• Performance:
• Sensitivity: 2mA at 1 meter (4Hz magnetometer); 5µA at 1 meter (33kHz locate)
• Dynamic range: 140dB RMS/√Hz
• Selectivity: 120dB
• Depth measurement precision1: ± 3% @ 2 meters and ± 5% @ 3 meters
• Locate accuracy: ± 5% of depth
• 4Hz current accuracy: ± 5% @ 1 meter depth with 1 Amp
• Active locate filter bandwidth: ± 3Hz, 0 < 1kHz; ± 10Hz, ≥1kHz
• Start-up time: <1 second
• Maximum depth readout2: Metric: Cable / Pipe: 30m Sonde: 20m; Imperial: Cable / Pipe: 98' Sonde: 65'
• Locate Functions:
• Active Locate Modes: Five: Peak; Peak+™ (choice of combined Peak & Guidance or Peak & Null); Guidance; Broad Peak™; Null
• Gain control: Guidance Mode: Automatic; Other modes: Manual gain using “+” or “-“ with one touch to return to center (50% of Full Scale)
• Custom locate frequencies: Up to 5 additional frequencies in the range 50Hz to 1kHz at 1Hz resolution in RD8100 mode
• Survey mapping frequencies:
• For conducting ACVG and ACCA surveys: ELF (4Hz + 98Hz/128Hz); ELCD (4Hz + 8Hz + 98Hz/128Hz); LFCD (4Hz + 8Hz + 512/640Hz ); 8kHz
• Requires a 4Hz signal from a PCM transmitter and an 8kHz boost locate signal from a second transmitter
• Power options:
• Rechargeable battery (standard): Custom Lithium-Ion (Li-Ion) battery pack
• Additional battery options: 2 × D-Cell (MN1300 / LR20) alkaline or Nickel Metal Hydride (NiMH) batteries;  Battery run-time (continuous)4: Li-Ion pack: 35 hours; 2 × Alkaline D-Cells 13 hours
• 8.4 Battery chemistry identification: Lithium-Ion pack: Automatic sensing
• NiMH / Alkaline: Operator set
• Charging options (Li-Ion pack): Mains charger: 100-250 Volts AC, 50/60 Hz; Automotive charger: 12-24V DC
• Charging time (Li-Ion pack): 3 hours to 80% from empty with maintenance trickle charging thereafter
• Physical Characteristics:
• Design: Ergonomic, balanced and lightweight design for comfortable use during extended surveys
• Construction: Injection Molded ABS Plastic
• Weight: With Lithium-Ion battery pack fitted: Metric: 2.2kg/Imperial: 4.8lb
• Ingress Protection rating: IP65: Protected against dust ingress and jets of water5 applied from any direction
• Display type: High contrast custom made monochrome LCD
• Audio options: Built-in water-resistant speaker; 3.5mm headphone socket
• Operating temperature6: : Metric: -20°C to 50°C; Imperial: -4°F to 122°F
• Storage temperature: Metric: -40°C to 70°C; Imperial: -40°F to 158°F
• Unit dimensions: Magnetometer foot attached: Metric: 745mm x 286mm x 134mm/Imperial: 29.3” x 11.3” x 5.3”
• Magnetometer foot removed: Metric: 648mm × 286mm × 125mm/Imperial: 25.5" × 11.3" × 4.9"
• Shipping dimensions: Metric: 700mm x 330mm x 260mm/Imperial: 27.6” x 13” x 10.2”
• Shipping weight Including bag and battery): Metric: 5.0kg/Imperial: 11.1lb
• NOTE: For detailed specifications, please see Specifications

• (1) Locator including removable magnetometer foot
• (1) A-Frame
• (2) D-Cell (MN1300 / LR20) alkaline
• (1) Quick Start User Guide
  
• (1) Mini USB 2.0 compliant data cable

Brochure/Datasheet

Specifications

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice