• 10A Max, 500 Micro Ohm Min Reading. Battery/Line Power - 230V Line Power
• Manual or Auto Range (6 ranges of current measurement, plus 3 ranges within each current range).
• Measurement of resistive and inductive materials (Two terminal measurement; Four terminal Kelvin measurement)
• Programmable Hi-Lo alarm with memory of 20 data. Auto-judgments of Hi (readings higher than Hi-Limit), Lo (readings lower than Lo-Limit) and Pass (readings between Hi-Lo Limits). Alarm (beeper) for Hi and Lo.
• Readings Hold function
• Communicate with PC via RS232C (to USB bridge) cable.

• TEST CURRENT: 100 µA - 10 A
• RESISTANCE RANGES:
• 0.4 mΩ-60 mΩ @ 10 A
• 4 mΩ-600 Ω @ 1 A
• 0.04 Ω-6 Ω @ 100 mA
• 0.4 Ω-60 Ω @ 10 mA
• 4 Ω-600 Ω @ 1 mA
• 40 Ω-6000 Ω @ 100 µA
• RESOLUTION: 1 µΩ @ 10 A
• INPUT: 100-240 V, 50/60 Hz
• BASIC ACCURACY: ±( 0.25% of reading ± 25 µΩ)
• PROTECTION: Overcurrent, short-circuit and thermal
• OPERATING TEMPERATURE: 14°F to 122° F (-10°C to 50°C)
• STORAGE TEMPERATURE: -4°F to 140° F (-20°C to 00°C)
• HUMIDITY: <95%, non-condensing
• DIMENSIONS: Length: 6” (152 mm)
• Width: 2.5” (64 mm)
• Height: 11” (279 mm)
• WEIGHT: 3 lbs (1.4 kgs)

• (1) Test leads, 1 set
• (1) Kelvin Clips, 1 set
• (1) RS232 to USB bridge cable
• (1) Rechargeable lithium battery 
• (1) Software on USB stick
• (1) User guide 
• (1) AC adaptor
• (1) Power cord
• (1) Nylon carrying bag

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice