The HD2303.0 is a portable instrument with a large LCD display. It is designed for use in the fi elds of air conditioning, heating, ventilation and environmental comfort. It uses hotwire or vane probes to measure air speed, fl ow rate, and temperature inside pipelines and vents. Temperature only is measured by immersion, penetration air or contact probes. The temperature sensor used can be chosen from the Pt100, Pt1000.
The probes are equipped with the SICRAM module, with the factory calibration data stored inside. The Max, Min and Avg function calculate the maximum, minimum or average values. Other functions include: the relative measurement REL, the HOLD function, and the automatic turning off that can also be excluded.The instruments have IP67 protection degree.
Display 2x41⁄2 digits plus symbols Visible area: 52x42mm
Operating conditions
Operating temperature -5°C - 50°C
Storage temperature -25°C - 65°C
Working relative humidity 0 - 90%RH without condensation
Protection degree IP67
Power Batteries 3 1.5V type AA batteries
Autonomy (*) 200 hours with 1800mAh alkaline batteries
Power absorbed with instrument off 20μA
Measuring unit °C - °F - m/s - km/h - ft/min - mph - knot - l/s m3/min - m3/h - ft3/s - ft3/min Connections Input module for the probes 8-pole male DIN45326 connector
Measurement of temperature by Instrument
Pt100 measurement range -200°C - +650°C
Pt1000 measurement range -200°C - +650°C
Resolution 0.1°C Accuracy ±0.1°C
Drift after 1 year 0.1°C/year
Instrument:
Dimensions (Length x Width x Height): 140x88x38mm
Weight: 160g (complete with batteries)
Materials: ABS
Display: 2x4½ digits plus symbols; Visible area: 52x42mm
Operating conditions:
Operating temperature: -5…50°C
Storage temperature: -25…65°C
Working relative humidity: 0…90%RH without condensation
Protection degree: IP67
Power supply:
Batteries: 3 1.5V type AA batteries
Autonomy (*): 200 hours with 1800mAh alkaline batteries
Power absorbed with instrument off: < 20μA
Measuring unit: °C - °F - m/s - km/h - ft/min - mph