The AEMC Model 1227 The Thermo-Anemometer Model 1227 is a portable, easy-to-use instrument which features an airflow sensor that is designed to accurately measure and log air flow or wind speed. The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using supplied DataView® software. The ergonomically designed case, large display, and intuitive function selection make this instrument the right choice for any application. The Thermo-Anemometer Model 1227 is designed for simple one-hand operation. It provides selectable measurement units to best fit your needs all on a blue luminescent backlit display.
User selectable wind speed or air flow measurement
User selectable measurement units M/S, F/M, KM/M, M/H or M3/S, M3/H, L/S, CF/M
Map mode profiles the illuminance map of the area or room by storing multiple measurements
Removable anemometer with expandable cord up to 48"
Min, Max and Average measurements stored
Hold function freezes the display
Spot or continuous recording up to 1 million measurements stored in 8MB flash memory
Blue luminescent backlit display
USB and Bluetooth communication
Magnetic mount
Battery or USB powered
DataView graphing and analysis software included
Measurement Range:
Air Speed: 0.25 to 35.0m/s (49.0 to 6,890.0fpm)
Air Flow: 0.00 to 2,999m3/h
Accuracy:
±3% of R + 4 cts (0.25 to 2.99m/s)
±3% of R + 1 ct (3.0 to 35.0m/s)
Resolution:
Air Speed:
0.01m/s from 0.25 to 2.99m/s
.1fpm from 49.0 to 99.9fpm
0.1m/s from 3.0 to 35m/s
1fpm from100 to 6,890fpm
Air Flow:
0.01m3/h from 0.00 to 2.99m3/h
0.1 m3/h from 3.0 to 99.9m3/h
1m3/h from 100 to 2.99fm3/h
Recording:
Manual start/stop on the product
Short press for MEM: spot recording/long press for REC at the defined default rate
Programed recording: start date, recording interval, and end date defined using DataView® software
Temperature:
Sensor:CTN
Accuracy:
Air Speed: 32° to 122°F: ±1.4°F
-4° to 32°F: ±2.3°F
Air Flow:
0° to 50°C: ±0.8°C
-20° to 0°C: ±1.6°C
General:
Other Functions: MIN-AVG-MAX-HOLD
Sampling Rate: Programmable from 1s, 2s, 5s, 10s, 20s, 30s, 2min, 5min, 10min, 15min, 30min, and 1hr
MAP mode: The MAP mode can be used to map the air speeds on the surface of a room. In this case the measurements are saved in the same file
Memory: 1,000,000 measurements on each channel (4MB). Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed.
Communication: USB 2.0 and Bluetooth 4.0 BLE range 1m typical
Power Source: 3x1.5V AA (LR6) alkaline batteries (included) or USB port (micro-USB adaptor offered as an accessory)
Battery Life: 200 hrs., / 8 days when recording with 15 minutes intervals
Dimensions: Case: 5.9 x 2.84 x 1.28" (150 x 72 x 32mm)
Sensor: 6.3 x 3.15 x 1.5" (160 x 80 x 38mm)
Weight (with battery):14.1oz (400g) with batteries
Case: Polycarbonate
Operating temperature: 14° to 140°F (-10° to 60°C)
Storage temperature: -4° to 140°F (-20° to 60°C)
Relative Humidity: Up to 90%
Ingress Protection (IP): IP40
EMC: EN 61326-1
Safety Compliance: IEC 61010-1
Warranty:2 years
(1) Soft Carrying Case
(3) 1.5 V AA Alkaline Batteries
(1) 6ft USB Cable, Type A to Type B USB
(1) Quick Start Guide
(1) User Manual
(1) DataView Application Software included on USB Drive