• Part Number: 2130.20
• True Megohmmeter
• Test voltage combination of 500V, 1000V, 2500V and 5000V
• Insulation measurements from 1kΩ to 10TΩ
• Adjustable and programmable test voltage (50 to 5000V)
• Automatic calculation of DAR, PI and DD values
• Direct measurement and display of Capacitance and Leakage Current
• Display resistance, test voltage and run time
• Programmable test run times and PI ratio times
• Smooth and Alarm functions
• Automatic test inhibition if live sample (>25)
• Automatic discharge and display of discharge voltage
• Large dual-display with time, voltage and measurements shown
• Rugged dual wall weatherproof field case
• Designed and built to IEC safety standards
• EN 61010-1, 600V, Cat. III
• Applications:
• Test insulation on cables, transformers, motors, generators, insulators and wiring installation
  
• High resistance or absorption tests
  
• Spot reading tests
  
• Timed resistance measurements
  
• Dielectric Absorption Ratio (DAR) and Polarization Index (PI) tests
  
• Multi-layer insulation testing
  
• Low insulation test range for testing old or flooded installations
  
• Motor insulation resistance measurements
  
• User selectable voltage testing to provide application specific testing
  
• Dielectric discharge testing to detect bad layers in multi-layer insulation testing
  

• AC/DC Voltage Measurement:
• Range:1 to 4000V
• Accuracy:
• 1 to 99.9V: ±(1% R + 5ct)
  
• 100 to 4000V: ±(1% R + 3ct)
  
• Resolution:
• 1 to 99.9V: 0.1V
  
• 100 to 999V: 1V
  
• 1000 to 4000V: 2V
  
• Frequency Range :
• 1 to 2500V: DC or 15 to 500Hz
  
• 2501 to 4000V: DC
  
• Input Impedance: 750kΩ or 3MΩ (range dependent)
• Insulation Measurement:
• Test Voltage / Resistance Range:
• 500V: 30kΩ to 2TΩ
  
• 1000V: 100kΩ to 4TΩ
  
• 2500V: 100kΩ to 10TΩ
  
• 5000V: 300kΩ to 10TΩ
  
• Measurement Accuracy:
• 30kΩ to 39.99GΩ: ±(5% R + 3ct)
  
• 40.0GΩ 10TΩ: ±(15% R + 10ct)
  
• Variable Voltage: 40 to 5,100V
• Auto Discharge: Discharge time < 7s/µF from Vtest to 25V @ 5000V
• Live Circuit Indicator: Test inhibition if terminal voltage > 3, 10, 20% (selectable by user) of test voltage
• General Features:
• Programmable Alarm: Yes
• DAR – PI – DD: Yes
• Ramp Mode: No
• Step Mode: No
• Capacitance Measurement: 0.005 to 49.99µf
• Leakage Current Measurement: 0 to 3mA
• Open Circuit Voltage: ≤ 1.1 x Vn ±2V (Vn ±2% in variable mode)
• Memory: 4kB Memory / Stores 20 test results
• Power Supply: Rechargeable NIMH battery pack; external 85-256V, 50/60Hz
• Battery Life: ≥ 1500  tests at 5000V into 5MΩ with a duty cycle of 5 seconds on and 25 seconds off
• Charging Time: 6 hours approximately (charging allowed during tests)
• Dimensions: 10.63 x 9.84 x 7.09” (270 x 250 x 180mm)
• Weight: 9.5 lbs (4.3kg)
• Altitude Operating: 6562' (2000m)
• Operating Temperature: 14° to +131°F (-10° to +55°C) ≤80% RH
• Storage Temperature: -40° to +158°F (-40° to +70°C) ≤90% RH
• IP Rating: IP 53
• Safety Compliance: EN 61010-1, EN 61557, 1000V CAT III, Pollution Degree 2

• (3) Integral Hippo Clips
• (1) Rechargeable Battery
• (1) Jumper Lead
• (1) Soft Accessory Bag
• (1) Instruction Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice