The BK Precision XLN15010GL Programmable Single-Output High Voltage DC Power Supply with GPIB/LAN Interface, 150V/10A delivers up to 1560 watts of clean power on a single output. The XLN15010-GL is a compact 1U high 19 inch wide supply was designed to meet the needs of both system integrators and bench top users. The flexibility of industry-standard GPIB, LAN, USB & RS485 interfaces combined with fast average command processing times of less than 50 ms make the XLN15010-GL ideal for ATE applications. The RS485 interface can be used to daisy chain up to 30 units and to remotely control them from one master PC. Bench top users will benefit from the built-in voltage and current meters displaying setting and output values concurrently, as well as an intuitive user interface with full keypad and rotary knob.The XLN15010-GL provides internal memory for storage of up to 10 different instrument settings that can be set and recalled via both the front panel and remote interfaces. Up to 10 sets of programs can be stored with a total of 150 steps allocated among the memory locations. Each step's voltage, current, and duration parameters can be set, with sequences configured for single or repeated execution. To protect the DUT, this model provides overvoltage (OVP), overcurrent (OCP), overpower (OPP), and overtemperature (OTP) protection. When a fault occurs, the power supply will turn off the output, sound an alarm, and display an error message. Similarly, with constant voltage-to-constant current (CV-to-CC) or constant current-to-constant voltage (CC-to-CV) foldback protection mode activated, the supply will shut down if load changes force the supply to transition between the two operating modes. The XLN15010-GL is also able to detect abnormally low AC input power and turn the output off when this condition occurs.
Dimensions (WxHxD): 16.5 in. x 1.74 in. x 18.1 in.
Master/slave mode for series and parallel connection of up to 4 units
List mode: Execute 150 step test sequences from instrument memory
Average command processing time < 50 ms
Programmable voltage and current slew rate allow for "soft starting" of loads
Built-in precise voltage and current measurements
Internal memory stores up to 10 instrument settings
USB, RS485, GPIB, and LAN interface
External analog programming interface
Remote sense 100-240V universal AC input with power factor correction
LabVIEW (TM) drivers available
Output Rating:
Output Voltage: 5-150 V
Output Current: 0.04-10.4 A
Output Protection:
OVP Adjustment Range: 5-158 V V
OVP Accuracy: 750 mV
Line Regulation:
Voltage: ≤ 17 mV
Current: ≤ 20.8 mA
Load Regulation:
Voltage: ≤ 17 mV
Current: ≤ 40.4 mA
Ripple and Noise (20 Hz-20 MHz):
Normal Mode Voltage (Load ≥ 0.5 % of max load): ≤ 10 mVrms /≤ 100 mVpp
Normal Mode Current: ≤ 15 mA
Programming Resolution:
Programming & Readback: 10 mV / 1 mA
Programming and Readback Accuracy ±(% output+offset):
Voltage: 0.05 %+75 mV
Current: 0.1 %+30 mA
General:
Average Command Response Time: ≤ 50 ms
Power Factor Correction (PFC) : ≥ 0.99 (Full load)
Efficiency: ≥ 80 % (Full load)
Remote Sense Compensation: 5 V
Rise Time at Full Load: ≤ 100 ms
Rise Time at No Load: ≤ 100 ms
Fall Time at Full Load: ≤ 100 ms
AC Line Rated Input Voltage/Hz: 100-240 VAC / 47 Hz-63 Hz
Tolerance/Variation in Voltage: -15 % to +10 % (10 % power de-rating mode when voltage under 95 VAC)
Maximum Rated Input Power: 1950 VA
Temperature Ratings: Operation (0 °C - 40 °C) / Storage (-10 °C - 70 °C)
Standard Interface: USB, RS485, analog interface. Optional Interface LAN, GPIB
Electromagnetic Compatibility: EMC DIRECTIVE 2004/108/EC, EN61326-1 : 2006, CISPR11, Class B, EN 61000-3-2 : 2006, EN 61000-3-3 : 1995 + A1 : 2001 + A2 : 2005, EN 61000-4-2/-3/-4/-5/-6/-11
Safety: EN61010-1:2001, EU Low Voltage Directive 2006/95/EC
Included Accessories: Power cord, rackmount kit, test report & certificate of calibration, terminal blocks for output connectors (high current models only)
(1) XLN15010-GL - Programmable Single-Output High Voltage DC Power Supply with GPIB/LAN Interface