• Part Number: 2130.03
• Test voltage selections of 50V, 100V, 250V, 500V and 1000V
• Insulation measurements to 4000GΩ (4TΩ)
• Direct measurement of DAR and PI values
• Direct measurement of sample capacitance
• Display of test voltage and run time
• Programmable test run times and PI times
• Smooth and Alarm functions
• Automatic test inhibition (if live sample >25V)
• Automatic discharge and display discharge voltage
• Powered by rechargeable NiMH battery pack
• RS-232 interface with USB 2.0 cable for easy report printing
• Built-in 182kB memory stores over 1500 test results
• Remote operation through PC or optional test probe
• Supplied with DataView software for data storage, real-time display, analysis and report generation
• Large backlit display with time, voltage and measurement result
• Automatically powers off when not in use
• Rugged, dual wall, weatherproof field case with detachable accessory pouch
• EN 61010-1, EN 61557, 600V CAT III
• Applications:
• Test insulation on cables, transformers, motors and wiring installations
  
• High resistance or absorption tests
  
• Spot reading tests
  
• Timed resistance measurements
  
• Dielectric absorption ratio (DAR) and polarization index(PI) tests
  
• Low insulation test range for testing old or flooded installations
  
• Motor insulation resistance measurements
  
• Continuity checks and low resistance measurements
  
• Computer controlled production line testing
  

• AC/DC Voltage Measurement:
• Range: 1 to 1000V
• Accuracy: ±(1% R + 3V)
• Resolution:
• 1 to 99.9V: 0.1V
  
• 100 to 1000V: 1V
  
• Frequency Range: DC and 16 to 65Hz
• Input Impedance: 750kΩ approx
• Insulation Measurement:
• Test Voltage / Resistance Range:
• 50V: 2kΩ to 200GΩ
  
• 100V: 4kΩ to 400GΩ
  
• 250V: 10kΩ to 1TΩ
  
• 500V: 20kΩ to 2TΩ
  
• 1000V: 40kΩ to 4TΩ
  
• Measurement Accuracy:
• 2kΩ to 39.99GΩ: ±(5% R + 3ct)
  
• 40.0GΩ 4TΩ: ±(15% R + 10ct)
  
• Auto Discharge: Discharge time < 2s/µF from Vtest to 25V
• Live Circuit Indicator: Inhibit test if terminal voltage > 25V prior to initialization of test
• Resistance Measurement:
• Range: 0.01Ω to 399.9kΩ
• Accuracy: ± (3% R + 3ct)
• Open Circuit Voltage: Approximately 12.4V DC
• Short Circuit Current: <6mA DC
• Continuity Measurement:
• Range: 0.01 to 39.99Ω
• Accuracy: ± (3% R + 4ct) with lead compensation
• Open Circuit Voltage: 12.4V DC
• Short Circuit Current: ≥ 200mA DC from 0.01 to 20.00Ω
• General Features:
• Programmable Alarm: Yes
• DAR – PI: Yes
• Ramp Mode: No
• Step Mode: No
• Capacitance Measurement: 0.05nf to 4.999µf, Accuracy: ± (10% R + 1ct)
• Memory: 128kB Memory / Stores over 1500 test results
• Communication: Serial port RS-232 with USB adapter (included)
• Software: DataView Software (included)
• Power Supply; Rechargeable NIMH battery pack; external 85-256V, 50/60Hz
• Battery Life: ≥ 5000 IR tests at 1000V into 1MΩ with a duty cycle of 5s on and 20s off; ≥ 4000 R tests of 1Ω with a duty cycle of 5s on and 20s off
• Charging Time: 4.5 hours approximately
• Dimensions: 9.45 x 7.28 x 4.33” (240 x 185 x 110mm)
• Weight: 7.5 lbs (3.4kg)
• Altitude Operating: 2000m
• Operating Temperature: 14° to +131°F (-10° to +55°C) ≤80% RH
• Storage Temperature: -40° to +158°F (-40° to +70°C) ≤90% RH
• IP Rating: IP 54
• Safety Compliance; EN 61010-1, EN 61557, 600V CAT III, Pollution Degree 2, CE

• (1) Digital/Analog Megohmmeter (Model 1060)
• (2) Test Leads (Red/Blue)
• (1) Shielded Test Lead (Black)
• (3) Alligator Clips (Red/Blue/Black)
• (1) Test Probe (Black)
• (1) RS-232 to USB Adapter
• (1) DB9 F/F Null Modem Cable (6 ft)
• (1) Rechargeable 9.6V NiMH Battery Pack
• (1) US 115V Power Cord
• (1) USB Drive with DataView Software
• (1) Detachable Accessory Pouch
• (1) User Manual

Brochure/Datasheet

Instruction Manual

AEMC Data Loggers Dataview Software (74.4 MB)

Note: Prices are not binding at any time subject to change without prior notice