• 10 analog input channels
• Programmable per channel
• ±20 mV to ±100 V over 12 ranges
• Supports direct-connected thermocouples of any type
• Full isolation per channel
• 4 discrete input channels
• 4 discrete alarm outputs
• Programmable as a group as logic or pulse inputs
• Pulse inputs support counter or frequency inputs
• Optional WiFi wireless operation with optional B-568 module
• Wireless LAN capability | remote monitoring & datalogging
• Flexible input system for wide array of applications
• Ability to access additional (GL100) sensors & adapters
• Extended memory capacity using SD memory card
• Max sampling interval up to 10ms

• Number of analog input channels: 10 channels
• External input/output *1:
• Input *2: Trigger or Sampling (1 channel), Logic/Pulse (4 channels)
• Output *3: Alarm (4 channels)
• Sampling interval: 10 ms to 1 hour (10ms to 50ms: voltage only) *4, External signal
• Time scale of waveform display: 1sec. to 24 hour /division
• Trigger, Alarm function:
• Trigger action: Start or stop capturing data by the trigger
• Repeat action: Off, On (auto rearmed)
• Trigger source: Start: Off, Measured signal, Alarm, External, Clock, Week or Time; Stop: Off, Measured signal, Alarm, External, Clock, Week or Time
• Condition Setting: Combination: OR or AND; Analog signal: Rising (High), Falling (Low), Window-in, Window-out; Logic signal: Pattern (combination of each input signal in high or low); Pulse (number of count): Rising (High), Falling (Low), Window-in, Window-out
• Alarm output Outputs a signal when alarm condition occurs in the input signal *5
• Pulse input function:
• Rotation count (RPM): Counts the number of pulses per sampling interval and converts to rpm (rotations per minute), Number of pulses for one rotation may be set to 50, 500, 5000, 50k, 500k, 5M, 50M, 500M rpm/F.S. (rpm./Full Scale)
• Accumulating count: Accumulates the number of pulses from the start of measurement 50, 500, 5000, 50k, 500k, 5M, 50M, 500M C/F.S. (Counts/Full Scale)
• Instant count: Counts the number of pulses per sampling interval 50, 500, 5000, 50k, 500k, 5M, 50M, 500M C/F.S. (Counts/Full Scale)
• Calculation function:
• Between channels: Addition, Subtraction, Multiplication, and Division for analog input
• Statistical: Select two calculations from Average, Peak, Maximum, Minimum, RMS
• Search function: Search for analog signal levels, values of logic or pulse or alarm point in captured data
• Interface to PC: USB (Hi-speed), WLAN (using B-568 option)
• Storage device: 
• Media: 4 GB Internal Memory; SD memory card (Support SDHC, up to 32 GB). Memory card not included
• Saved contents: Captured data, Setting conditions, Screen copy
• Capturing mode:
• Mode: Normal, Ring, Relay
• Ring: Saves most recent data (Number of captured data: 1000 to 2000000 points) *7
• Relay: Saves data to multiple files without losing data until data capturing is stopped
• Replay Data: Replays captured data that was saved in the GL240 (in BGD or CSV format)
• Scaling (Engineering unit) function:
• Measured value can be converted to the specified engineering unit:
• - Analog voltage: Converts using four reference points (gain, offset)
• - Temperature: Converts using two reference points (offset)
• - Pulse count: Converts using two reference points (gain)
• Action during data capture:
• Displaying parst data (using dual display mode (Current + Past data))
• Hot-swapping the SD memory card
• Saving data in between cursors
• Display:
• Size: 4.3-inch TFT color LCD (WQVGA: 480 x 272 dots)
• Language: English, French, German, Chinese, Korean, Russian, Spanish, Japanese
• Information *8: Waveform in Y-T with digital values, Waveform only, Digital value, Digital values and statistics values
• Operating environment: 0 to 45 ºC, 5 to 85 % RH (non condensed) (When operating with battery pack 0 to 40 ºC, charging battery 15 to 35 ºC)
• Power source:
• AC adapter: 100 to 240 V AC, 50/60 Hz (1 pc of adapter is attached as standard accessory)
• DC power: 8.5 to 24 V DC (DC drive cable (option B-514) is required)
• Battery pack: Mountable battery pack (battery pack (option B-517): 7.2V DC, 2900mAh)
• Power consumption *9: Max. 36 VA
• External dimensions (W x D x H): Approx.188 x 117 x 42 mm (Excluding projections)
• Weight *10: 500 g
• *1 Input/Output cable for GL (option B-513) is required to connect the signal.
• *2 Input signal; Voltage range: Up to 24V (common ground) Signal type: Voltage, Open collector, Contact (relay) Threshold: Approx. + 2.5 V (Hysteresis: Approx. 0.5V (2.5V to 3V))
• *3 Output signal: Open collector (pull-up to 5V by 10kΩ resistor) Voltage: Max. 30V Current: Max. 0.5A Collector dissipation: Max. 0.2W
• *4 Minimum interval varies by number of channels used.
• *5 Output port can be specified in each input channel.
• *7 Size of the capture data will be limited to 1/3 of available memory.
• *8 Display mode is switched every time the dedicated key is pressed. In magnified digital value mode, the displayed channel number can be specified. In the waveform display mode, the changing of the time scale will be effective from the point of the next displayed data.
• *9 Rating under maximum power consumption using the AC adapter, with LCD display on, and battery pack being charged.
• *10 Excludes AC adapter and battery pack.
• NOTE: For detailed specifications. Please see Brochure/Datasheet
  

• (1) GL240 data logger
• (1) 4 GB flash memory card
• (1) AC adapter
• (1) Software on CD

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice