GE Inspection Technologies USM Go+ [GEIT1480176] Flaw Detector, Base

The GE Inspection Technologies USM Go Flaw Detector has been ergonomically designed to provide an instrument which is light, small and easy to use in the harshest inspection environments. Navigation is simplified using the proven graphical user interface (GUI) and D-pad (arrow key) control, allowing one-handed operation and fast and accurate adjustment.

Weld Inspection

• Trigonometric projections
  
• AWS
  
• DAC
  
• DGS
  

Inspection of Forgings and Castings

• Manual PRF adjustment
  
• Phantom echo indicator
  
• DGS
  

Inspection of Rails

• High PRF (up to 2000 Hz)
  
• Lightweight: 850 g (1.87 lb)
  
• Small size and ergonomics
  

Inspection of Composites

• RF Display
  
• 2 gates with B-start triggered with echo in gate A
  
• TCG correction with high slope 120 dB/μs
  
• Reflector depth indicated in layer
  

USM Go+ Standard Model (GEIT1480179) Kits:

ASME Weld

• MWB 45° angle beam transducer, 4MHz frequency, 8x9mm element (0056927)
  
• MWB 60° angle beam transducer, 4MHz frequency, 8x9mm element (0056928)
  
• MWB 70° angle beam transducer, 4MHz frequency, 8x9mm element (0056929)
  
• MSEB dual element straight beam transducer, 4MHz, 3.5x10mm element (0057462)
  
• Right Angle Lemo #00 to Lemo #00 cable (022-509-819)
  
• Right Angle Lemo #00 to Dual Lemo #00, KBA 533 cable (022-509-821)
  

AWS Weld

• AWS Gamma angle beam transducer, 2.25MHz frequency, 16x19mm element (113-292-601)
  
• AWS 45° wedge, 63x63mm element (118-340-104)
  
• AWS 60° wedge, 16x16mm element (118-340-105)
  
• AWS 70° wedge, 16x16mm element (118-340-106)
  
• Right Angle Lemo #00 to BNC cable (022-509-822)
  

General Purpose

• MB S straight beam transducer, 4MHz frequency, 10mm element (0057749)
  
• Right Angle Lemo #00 to Lemo #00 cable (022-509-819)
  

Features:

---

• USM Go+ comes with D-pad (arrow key) control
• DMS Go+ thickness gauge upgrade available
• LCD display, 800 x 480 pixels
• Flip function allows for left or right hand use
• Pulser (EN12668 specifications)
  • Simulated spike pulser mode
    • 120 to 300V amplitude
  • Uni-polar square wave (optional)
    • 120 to 300V with 10V steps pulser voltage
    • 30 to 500ns with 20ns steps pulser width
  • 50 or 1000 Ohms damping
• Vibration and shock tested
• IP67 dustproof & waterproof

What's In The Box:

---

• (1) Lithium Ion "on-board" rechargeable battery
• (1) Battery charger /AC power supply
• (1) LCD screen protectors (10-pack)
• (1) SD card (8GB)
• (1) Transport case
• (1) Hand strap
• (1) Quick reference card
• (1) Operating manual on CD
• (1) Certificate of conformity

Brochure/Datasheet

---

Instruction manual

Note: Prices are not binding , subject to change without prior notice