Fluke Calibration 9172 [9172-C-R-256] Field Dry-Well Metrology Temperature Calibrator with Model 9172-INSC ("C" Insert), INSX and Reference Thermometry, 35 °C to 425 °C

The Fluke Calibration 9172CR256 Field Dry-Well Metrology Temperature Calibrator with Model 9172-INSC ("C" Insert), INSX and Reference Thermometry, 35 °C to 425 °C lets you bring lab-quality performance into whatever field environment you might work in. New analog and digital control techniques provide stability as good as ±0.005 °C. And with dual-zone control, axial (or "vertical") uniformity is as good as ±0.02 °C over a 60 mm (2.36 in.) zone.

There are six critical components of performance in an industrial heat source (which the European metrology community explains, for example, in the document EA-10/13): calibrated display accuracy, stability, axial (vertical) uniformity, radial (well-to-well) uniformity, impact from loading, and hysteresis. Fluke Calibration added a seventh in the form of a legitimate reference thermometer input and created an entirely new product category: Metrology Wells.

Features:

• Features INSX reference thermometry
• 1972
• Temperature range (at 23°C ambient): 35 °C to 425 °C (95 °F to 797 °F)
• Display accuracy: ±0.1 °C: 35 °C to 100 °C; ±0.15°C: 100 °C to 225 °C; ±0.2°C: 225 °C to 425 °C
• Stability: ±0.005 °C: 35 °C to 100 °C; ±0.008 °C: 100 °C to 225 °C; ±0.01°C: 225 °C to 425 °C
• Axial uniformity: ±0.05 °C: 35°C to 100 °C; ±0.1 °C: 100 °C to 225 °C; ±0.2 °C: 225 °C to 425 °C
• Radial uniformity: ±0.01 °C: 35 °C to 100 °C; ±0.02 °C: 100 °C to 225 °C; ±0.025 °C: 225 °C to 425 °C
• Built-in reference input:
• Temperature range: -200 °C to 962 °C (-328 °F to 1764 °F)
• Resistance range: 0 Ohm to 400 Ohm, auto-ranging
• Characterizations: ITS-90 subranges 4, 6, 7, 8, 9, 10, and 11 Callendar-Van Dusen (CVD): R0, α, β, δ
• Resistance accuracy: 0 Ohm to 20 Ohm: 0.0005 Ohm; 20 Ohm to 400 Ohm: 25 ppm
• Immersion depth to 203 mm (8 in.)
• Combines bath-level performance with dry-well functionality and legitimate reference thermometry
• Bring lab-quality performance into whatever field environment you might work in
• 9172-INSC
• Six 6.35 mm (1/4 in.) holes
• Removable inserts sized for probes with named diameter
• Use additional inserts to broaden range of hole sizes available
• For use with Model 9172

What's In The Box:

• (1) "C" Insert
• (1) Power Cord
• (1) RS-232 Cable
• (1) Getting Started Guide
• (1) User Manual
• (1) Report of Calibration and Calibration Label
• (1) DIN Connector
• (1) Insert Removal Tool
• (1) 9930 Interface-it Software and User Manual

Brochure/Datasheet

Instruction manual

---

Note: Prices are not binding , subject to change without prior notice