Fluke Calibration 1524 [1524-P3-256] Dual Channel Reference Thermometer with Datalogger

1523-156

• Input channels: 1
  
• Resolution PRTs and thermistors: 0.001°; thermocouples: 0.01°
  
• Logging: 25 readings with statistics
  
• Sample interval (normal): 1 second
  

5627A-12-P

• Termination: INFO-CON for Models 1523 and 1524
  
• Resistance: Nominal 100 Ohm
  
• Temperature coefficient: 0.00385 Ohm/Ohm/°C nominal
  
• Temperature range: -200 °C to 420 °C (transition and cable temperature: 0 °C to 150 °C)
  
• Drift rate (k=2): ±0.04 °C at 0 °C after 100 hours at 420 °C
  
• Sheath material: 316 stainless steel
  
• Leads: PTFE-insulated, nickel-plated stranded copper, 22 AWG
  
• Time constant: Four seconds maximum for 63.2% response to step change in water moving at 3 fps
  
• Bending radius: Sheath may be ordered with a bend on minimum radius of 19 mm (3/4 in.) except for 50 mm (2 in.) area of sheath near tip
• Calibration: Includes manufacturer's NVLAP-accredited (lab code 200706-0) calibration and table with R vs; T values in 1 °C increments from -196 °C to 500 °C; ITS-90 coefficients included
• Immersion: At least 100 mm (4 in.) recommended
  
• Calibrated accuracy (includes calibration uncertainty and 100 hr drift) (k=2): ±0.026 °C at -196 °C; ± 0.046 °C at 0 °C; ±0.077 °C at 200 °C; ±0.124 °C at 420 °C
• Size: 305 mm x 6.35 mm (12 in. x 1/4 in.)

Specifications

• (1) Single Channel Handheld Reference Thermometer (1523)
• (1) Secondary PRT Probe with NIST Traceable Calibration (5627A-12-P)
• (1) Universal TC INFO-CON Connector
• (1) ToolPak Magnetic Hanging Kit (TPAK)
• (1) Carrying Case

Brochure/Datasheet

Instruction manual

Note: Prices are not binding , subject to change without prior notice