• Support flow meter testing with frequency and CPM functions
• Perform fast linearity tests with auto- step and auto-ramp features
• Power transmitters during test using loop supply with simultaneous mA measurement
• Store frequently used test setups for later use
• Backlight lets you work in poor light
• Large battery capacity of four AA cells
• Battery door for easy changes
• Also available Fluke 725EX Intrinsically safe model

Voltage DC:

• 30.000V: 0.02%+ 2 counts (upper display)
• 10.000 V: 0.02%+ 2 counts (lower display)
• 90.00 mV: 0.02%+ 2 counts
• -10.00 mV to 75.00 mV: 0.025 % + 1 count (via TC connector)

Current DC:

• 24.000 mA:  0.02%+ 2 counts

Resistance: 

• 0.0 to 400.0 Ω: 0.1Ω (4-wire), 0.15Ω (2- and 3-wire)
• 401 to 1500 Ω: 0.5Ω (4-wire), 1Ω (2- and 3-wire)
• 500 to 3200 Ω: 1Ω (4-wire), 1.5Ω (2- and 3-wire)

Frequency:

• 2.0 to 1000.0 CPM: 0.05 % + 1 count
• 1.0 to 1100.0 Hz: 0.05 % + 1 count
• 1.00 to 10.00 kHz: 0.05 % + 1 count
• Sensitivity: 1 V peak-to-peak-minimum

Pressure:

• Accuracy from 0.025% of range using any of 8 intrinsic safe pressure modules. (for detailed specifications refer to pressure modules in options and accessories)
• Modules available for differential, gauge, vacuum, absolute, dual and high pressure.

Source Accuracy:
Voltage DC:

• 100.00 mV: 0.02%+2 counts
• 10.000 V: 0.02%+2 counts
• -10.00 mV to 75.00 mV: 0.025 % + 1 count (via TC connector)

Current DC:

• 24.000 mA (Source): 0.02%+ 2 counts
• 24.000 mA (Simulate): 0.02%+ 2 counts

Resistance:

• 15.0 to 400.0 Ω: 0.15 Ω (exc. current 0.15 to 0.5 mA), 0.1 Ω (exc. current 0.5 to 2 mA)
• 401 to 1500 Ω: 0.5 Ω(excitation current 0.05 to 0.8 mA)
• 1500 to 3200 Ω: 1 Ω(excitation current 0.05 to 0.4 mA)

Frequency:

• 2.0 to 1000.0 CPM: 0.05%
• 1.0 to 1100.0 Hz: 0.05%
• 1.00 to 10.00 kHz: 0.25%
• Waveform: 5 V p-p squarewave, -0.1 V offset

RTDs and Thermocouples:

• Measure Accuracy:
• NI-120: 0.2 °C
• PT-100 (385): 0.33 °C
• PT-100 (393): 0.3 °C
• PT-100 (JIS): 0.3 °C
• PT-200 (385): 0.2 °C
• PT-500 (385): 0.3 °C
• PT-1000 (385): 0.2 °C
• Resolution:0.6°C
• J: 0.7 °C
• K: 0.8 °C
• T: 0.7 °C
• E: 1.8 °C
• R: 1.5 °C
• S: 1.4 °C
• B: 0.7 °C
• L: 0.75 °C
• U: 0.9 °C
• N: J, K, T, E, L, N, U: 0.1 °C, 0.1 °F B, R, S: 1 °C, 1 °F
• Resolution: 0.6°C
• XK: 1.2°C
• BP

Source Accuracy:

• NI-120 : 0.2 °C
• PT-100 (385) : 0.33 °C
• PT-100 (393): 0.3 °C
• PT-100 (JIS): 0.3 °C
• PT-200 (385): 0.2 °C
• PT-500 (385): 0.3 °C
• PT-1000 (385): 0.2 °C
• Resolution: 0.1 °C
• Note: Accuracy stated for 4-wire measurement
• J: 0.7 °C
• K: 0.8 °C
• T: 0.8 °C
• E: 0.8 °C
• R: 1.4 °C
• S: 1.5 °C
• B: 1.4 °C
• L: 0.7 °C
• U: 0.75 °C
• N: 0.9 °C
• Resolution: J, K, T, E, L, N, U: 0.1 °C, B, R, S: 1 °C
• XK: 0.6°C
• BP: 1.2°C

Specifications
Ramp Functions: 

• Source functions: Voltage, current, resistance, frequency, temperature
• Ramps: Slow ramp, Fast ramp, 25% step-ramp

Loop Power Function: 

• Voltage: 12 V
• Accuracy: 10%
• Maximum current: 22 mA, short circuit protected

Step Functions:

• Source functions: Voltage, current, resistance, frequency, temperature
• Steps: 25% of range, 100% of range

Safety Specifications:

• Agency Approvals: ATEX II 1 G Ex ia IIB 171°C; I.S. Class I, Division 1 Groups

Mechanical & General Specifications: 

• Size: 130 x 236 x 61 mm (5.188" x 9.291" x 2.402")
• Weight: 0.85 kg (1.874 lbs.)
• Batteries: 4 AA Alkaline batteries
• Warranty: 3 years
• Battery Replacement: Separate battery compartment, accessible without breaking calibration seal
• Side port connections: Pressure module connector

• (1) TL75 Test Leads
• (1) Test Clip Set
• (1) Pair of stackable test leads
• (1) Product Overview Manual
• (1) Users Manual
• (1) CD-Rom
• (1) CE and CSA markings

 Brochure/Datasheet

 Instruksi Manual

Download

Note: Prices are not binding at any time subject to change without prior notice