• Part Number: PRT200
  
• Input Voltage: 75 to 1000VAC
  
• Frequency Range: 45 to 65Hz
• 75 to 1000VAC input voltage with 45 to 65Hz frequency range
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
• Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
• Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement
• Adjustable Hi/Lo LED brightness switch for making measurements in dimly lit areas or sunlight
• Fully insulated alligator clips with wide jaws
• Low battery warning
• Applications: 
• Motor Rotation
  
• Manufacturing Plants
• Electricians
• Automotive

• Measurement Principle: Static induction
• Input Voltage: 75 to 1000VAC
• Frequency Range: 45 to 65Hz
• Max conductor diameter: 33mm (1.3”)
• Probe length: 86cm (34”)
• Auto-Off:  5 min. without sequence detection
• Low Battery Warning: Power LED flashes
• Batteries: 4 x 1.5V AA
• Current consumption: 15mA
• Operating Temperature & Humidity: -10°C to 50°C (14°F to 122°F) Max. 80% R.H.
• Storage temperature & Humidity: -20°C to 60° (-4°F to 140°F) Max. 80% R.H.
• Safety: This meter is intended for origin of installation use and protected against the users by double insulation per EN61010-1 to Category IV 600V and Category III 1000V; Pollution Degree 2.
• Approvals: CE

• (1) PRT200 Non-Contact Phase Sequence Tester
• (3) Built-In 30" Test Leads with Large Color-Coded Alligator Clips
• (4) AA Batteries
• (1) Pouch Case

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice