Global Water WL16 [ARB050] Vented Water Level Logger, 0-15 ft Pressure Range, 50 ft Cable, USB Communications

The WL16 is a data logger and submersible pressure transducer combination designed for remote monitoring and recording of water level or pressure data. The water level logger can record over 81,000 readings and has four unique recording options, fast (10 samples per second), programmable interval (1 second to multiple years), logarithmic, and exception. Multiple depth ranges are available from 3 ft to 500 ft of water level change. A 25 ft vented cable is standard, and optional cable lengths are available from the factory up to 2000 ft.

The WL16 Water Level Logger is housed in a weather-resistant cylindrical enclosure, which slips inside a standard 2-inch PVC pipe. The WL16 is easily adapted with standard hardware for wellhead mounting, stream, or other installations. Two internal 9 VDC alkaline batteries will typically power the WL16 for approximately one year even if one of the batteries fails. A third on-board battery ensures your data in the event both 9V batteries fail. The WL16 includes software for Windows computers, allowing easy data transfer to a laptop or desktop.

Features:

• Four sample modes: 10 times per second, timed, logarithmic, and exception
• CE Certified
• User friendly software included
• USB communication
• No need to remove sensor for data collection or battery change
• Highly accurate water level measurements
• User programmable start and stop alarms, engineering units, and field calibration setup
• Unique 0-3 ft range for shallow water
• Wet-wet transducer eliminates vent tube concerns
• Automatic barometric pressure and temperature compensation

What's In The Box:

---

• (1) Cable 50 ft.
• (1) USB Communications
• (1) Global Logger Interface Software on CDROM
• (1) User manual

Brochure/Datasheet

Instruction manual

Note: Prices are not binding , subject to change without prior notice