• Part Number: 2129.83
• Perform tests normally or with both sides of the switch gear connected to the ground
• Four languages
• Cooling system to improve the number of sequential tests that can be performed
• Programmable Test Duration to 120 seconds
• Direct viewing of stored tests on the instruments display
• Programmable and manual test current selection
• Accurately measures low contact resistances with test currents up to 200A
• Measures resistances up to 1Ω
• Low resolution of 0.1µΩ
• Large LCD digital display
• Stores up to 8,000 test results
• USB communication interface
• Direct printout using DataView software and a PC
• Rugged, light-weight and water-resistant case
• Applications:
• Switchgear contact resistance
  
• Circuit breaker contact resistance
  
• Air frame bonding
  
• Rail bonding
  
• Pipeline bonding
  

• ELECTRICAL
• Test Current Range: 5 to 200A (True DC)
• Resistance Range:
• 0.1µΩ to 2mΩ
  
• 2 to 200mΩ
  
• 200mΩ to 1Ω
  
• Accuracy: ± 1% of reading from 50µΩ to 1Ω
• Resolution:
• 0.1µΩ to 2mΩ; 0.1µΩ (50 to 200A)
• 2 to 200mΩ; 10µΩ (25A at 200mΩ)
• 200mΩ to 1Ω; 1mΩ (5A at 1Ω)
• Output Voltage:
• 100VAC: 4.2V @ 200A
  
• 220VAC: 8.6V @ 200A
  
• Max. Load Resistance:
• 100VAC: 20mΩ @ 200A
  
• 220VAC: 42mΩ @ 200A
  
• Measurement Method: Four-terminal, Kelvin-type
• Test Mode: Normal or both sides grounded (BSG)*
• Adjustable Test Time:
• Unlimited for test currents of 100A or less;
  
• 5 to 120 seconds for test currents above 100A
  
• Memory: Stores up to 8000 measurements
• Automatic Storage Of Test Results: Yes
• Interface: USB 2.0, supplied with DataView® software for download and reporting
• Power Supply: 100 to 240VAC, 50/60Hz
• MECHANICAL
• Dimensions: 19.8 x 15.5 x 7.5" (502 x 394 x 190mm)
• Weight: 24.25 lbs (11 kg) approx
• ENVIRONMENTAL
• Operating Temperature: 32° to 122°F (0° to 50°C)
• Storage Temperature: 14° to 158°F (-10° to 70°C)
• Humidity: 95% RH (non-condensing)
• SAFETY
• Environmental Protection: IP 54 with cover closed
• Safety Rating:  IEC61010-1

• (1) Set of 20 ft Kelvin test leads w/C clamp
• (1) Ground lead (green) with clamp
• (1) 5 ft USB cable
• (1) 110V US power cord
• (1) 12A fuse (5x20mm)
• (1) User manual
• (1) DataView software

Brochure/Datasheet

Instruction Manual

AEMC Data Loggers Dataview Software (74.4 MB)

Note: Prices are not binding at any time subject to change without prior notice