• Part Number: 2129.80
• Performs reliable low resistance measurements from 5µΩ to 400Ω
• Six selectable resistance ranges: 4000µΩ, 40mΩ, 400mΩ, 4000mΩ, 40Ω, 400Ω
• Four-terminal Kelvin resistance measurement eliminates test lead resistance
• Selectable test currents of 10A, 1A, 100mA and 10mA
• ±0.25% basic accuracy and resolutions down to 1µΩ
• Reverse polarity switch on front panel
• Overload and input fuse protection
• Automatic decimal point and zeroing
• Large terminals accept banana plugs and spaded lugs
• Rechargeable NiMH battery with internal charger (110/220V)
• Easy-to-read multifunctional backlit display
• Includes DataView software for data storage, real-time display, analysis and report generation
• Manufactured to IEC/EN 61010-1 category III 50V, Pollution Degree 2

• Resistance
• Measurement Range:
• 5.0 to 3999µΩ
  
• 4.0 to 39.99mΩ
  
• 40.0 to 399.9mΩ
  
• 400 to 3999mΩ
  
• 4.0 to 39.99Ω
  
• 40.0 to 399.9Ω
  
• Resolution:
• 1µΩ
  
• 10µΩ
  
• 100µΩ
  
• 1mΩ
  
• 10mΩ
  
• 100mΩ
  
• Accuracy: ± 0.25% ± 2ct
• Measurement current :
• 10.2A ± 2% (1)
  
• 1.02A ± 2%
  
• 102mA ± 2%
  
• 102mA ± 2%
  
• 10.2mA ± 2% (2)
  
• Open voltage: 4 to 6V
• Inductance: 0.5H Max
• (1) With nominal value of 10.2A, the measurement current is at least 10A whatever the charge condition of the battery.
• (2) The current is 10mA only up to 300Ω. If the battery is low, it can fall to as low as 8mA.
• Voltage Measurement Indication
• Measurement Range:
• 0.01 to 3.999mV
  
• 4.0 to 39.99mV
  
• 40.0 to 399.9mV
  
• 0.40 to 3.999V
  
• 4.0 to 4.70V
  
• Resolution:
• 1µV 10µV
  
• 100µV
  
• 1mV
  
• 10mV
  
• Current Measurement Indication:
• Measurement Range:
• 5.0 to 39.99mA
  
• 40.0 to 399.9mA
  
• 0.40 to 3.999A
  
• 4.0 to 11.00A
  
• Resolution
• 10µA
  
• 100µA
  
• 1mA
  
• 10mA
  
• Influences on the Resistance Measurement:
• Quantities of Influence:
  
• Range of use:
• Temperature: -10 to +55°C
• Typical: 0.1% /10°C
• Maximum: 0.5% /10 °C + 2cts
• Relative Humidity: 10 to 85% RH @ 45°C
• Typical: 0.1 %
• Maximum: 0.5% + 2cts
• Supply Voltage: 5 to 7V
• Typical: 2cts
• Maximum: 0.2% / V + 2cts
• Series Mode Rejection, 50/60Hz*: U (AC) = (R measured x I measurement)
• Typical: < 0.2%
• Maximum: 2% + 1ct
• Common Mode Rejection, 50/60Hz AC: 0 to 50 V AC
• Typical: > 80 dB
• Maximum: > 60 dB
• *Example: If the measured resistance is 1mΩ and the measurement current is 10A, an alternating voltage of 1mV RMS in series with the resistance to be measured will induce an error of not more than 2%.
  
• General Specifications
• Storage Memory: 99 tests, supplied with DataView® software for download and reporting
• Automatic Storage of Test Results: Yes
• Battery: Rechargeable NIMH battery pack 6V, 8.5Ah.
• Battery Life:
• 10A: ≥ 850  tests with a duty cycle of 5 seconds on and 25s off
  
• 1A: ≥ 3500 tests with a duty cycle of 5 seconds on and 25s off
  
• 100mA: ≥ 4500 tests with a duty cycle of 5 seconds on and 25s off
  
• 10 mA: ≥ 5000 tests with a duty cycle of 5 seconds on and 25s off
  
• In standby mode: Battery life 4 to 6 months
  
• Dimensions (L x W x H): 10.70 x 9.76 x 7.18” (272 x 248 x 182mm)
• Weight: 10 lbs (4.5 kg)
• Operating Temperature: -10° to +55°C (14° to 131°F) & 10 to 85% RH
• Storage Temperature (without battery): -40° to +70°C (-40° to 158°F) & 10 to 90% RH
• Altitude Operating: 2000 m
• IP Rating: IP 54 per IEC 60529 cover closed
• Safety: IEC/EN 61010-1 category III 50V, Pollution Degree 2

• (1) 10A Micro-Ohmmeter (Model 6240)
• (1) Large Tool Bag
• (2) Kelvin Clips (10 ft, 10A-Hippo)
• (1) US 115V Power Cord
• (1) Pad with Measurement Results Forms
• (2) Spare Fuses (12.5A)
• (1) NiMH Rechageable Battery Pack
• (1) USB Drive with DataView Software & User Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice