• Part Number: P01120052A
• Current : 2,400 A AC
• Ratio : 3000:5
• Output : 1.666 mA / A
• Output signal: alternating current
• Transformation ratio: 3,000/5
• Output via isolated Ø 4 mm female sockets
• Output protected against voltage surges

• ELECTRICAL SPECIFICATIONS:
• Current range: 1 A AC .. 2,400 A AC (3,000 A for temperature < 35 °C)
• Current transformation ratio: 3000:5
• Output signal: 1.666 mA / A AC (5 A for 3,000 A)
• Overload: 3600 A for 10 minutes
• Accuracy: In accordance with IEC 185-26-27, 5 VA class 1 from 48 Hz to 1,000 Hz
• Bandwidth: 30 Hz to 5 kHz (in continuous use above 1 kHz, the max. measurement current is limited)
• Ampere second product: 90 A.s
• Load impedance: < 1 Ω
• Operating voltage: 600 V AC
• Common mode voltage: 600 V AC
• Influence of adjacent conductor: 0.005 A / A AC
• Influence of conductor position in jaws:1 % ± 0.1 A
• MECHANICAL SPECIFICATIONS:
• Operating temperature:-10 °C to +50 °C
• Storage temperature: -25 °C to +80 °C
• Influence of temperature: < 0.1 % per 10 °K
• Max. jaw opening: 90 mm
• Max. jaw insertion capacity: Cable: 64 mm
• Group of wires: 50 x 135 mm - 64 x 100 mm
• Casing protection rating: IP20 in accordance with IEC 529
• Drop test: 500 mm (IEC 68-2-32)
• Shock resistance: 100 g, in accordance with IEC 68-2-27
• Vibration resistance: 10 / 55/10 Hz, 0.15 mm test in accordance with IEC 68-2-6
• Self-extinguishing capability: Casing: UL94 V0; Jaws: UL94 V2
• Dimensions: 120 x 315 x 48 mm
• Weight: 1,200 g
• Colour: Dark grey casing with red jaws
• Output: 2 Safety sockets (4 mm)
• SAFETY SPECIFICATIONS:
• Electrical safety: Double insulation or reinforced insulation between the primary and the secondary circuits and the outside casing in accordance with IEC 1010-2-032.
• 600 V category III, pollution degree 2
• 300 V category IV, pollution degree 2
• Electromagnetic compatibility (EMC): EN 50081-1: class B, EN 50082-2:
• Electrical discharge: IEC 1000-4-2
• Radiated field: IEC 1000-4-3
• Fast transients: IEC 1000-4-4
• Magnetic field at 50/60 Hz: IEC 1000-4-8
• (1) Conditions of reference: 23 °C ± 5 °K, 20 % to 75 % RH, 48 Hz to 65 Hz, external magnetic fi eld < 40 A/m, no DC component, no current-carrying conductor nearby, centred test sample, load impedance 0.2 Ω.

• (1) D33N - AC Current Probe Adapter
  
• (1) Instruction Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice