Dakota Ultrasonics MVX [Z-149-0004] Ultrasonic Thickness Gauge With Enhanced Display and T-102-2700 Probe

The Dakota Ultrasonics MVX Ultrasonic Thickness Gauge is loaded with all of the features of the MX gauges and a lot more. The physical size, weight, and display resolution are just a few of the benefits of the MVX. The adjustable square wave pulser provides the flexibility necessary for both high resolution and penetration requirements.

The MVX is equipped with multiple viewing options to provide users with a complete set of inspection tools: (RF waveform, +/- Rectified waveform, Time based B-Scan, and Large Digits). The A-Scan rectified mode is commonly used for detecting flaws/pits in pulse-echo mode and measuring thru-paint and coatings in echo-echo mode. The time-based B-Scan feature of the MVX displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.

The MVX has the ability to store 64 custom user-defined setups. All factory setups can be selected, edited and saved to any setup location. The MVX is also equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs. The built-in transducer types offer increased linearity between transducers.

The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material and display the minimum measurement scanned. The Visual alarm has Hi and Lo limit settings for specific application tolerances. The find feature is able locate the detection point, while automatically adjusting the display to bring the signal into view.