• Five (5) measuring modes: Diagnostic, Displacement, Velocity, Acceleration Peak and Acceleration, as required for a wide choice of vibration analysis techniques.
• Compact, ergonomic, lightweight design with simple button keypad and menu make for easy operation.
• Selectable backlit display for dark, hard-to-read locations
• Four (4) Target Machinery Classes, per ISO 10816, in Diagnostic mode: Classes I, II, III and IV, for machines from less that 15 KW to Large Prime Movers, such as turbo generators and gas turbines with outputs greater than 10 MW.
• Powerful magnet-fitted sensor assures dependable mounting on vibrating steel surfaces

• Sensor: Piezoelectric vibration pickup 
• Probe Operating temperature: 0 ~ 80° Celsius 
• Probe Dimensions: Ø 24 x 14mm (Total heigth 115mm) 
• Measuring modes: Acceleration (ACC): RMS value
• Acceleration (ACCP): PEAK value
• Velocity (VEL): RMS value
• Displacement (DISP): P-P value 
• Linearity: <+/-2% F.S. of each range 
• Resolution: 1/200 F.S. of each range 
• Display; 4½ - digit LCD display 
• Display Size: 18.4 x 49.8 mm 
• Power: One AA alkaline battery 
• Automatic power off: No use for more than 10 minutes;  Low battery 
• Battery life: > 8 hours continuous use (light off) 
• Operating temperature: 0° ~ 50° Celsius (<90% RH, Non condensing) 
• Storage temperature: -10° ~ 60° Celsius (<90% RH, Non condensing) 
• Dimensions: 69 W x 30 D x 154 H mm 
• Weight: Approx. 140g (battery included) 
• Warranty: Gauge: 1 year
• Probe: 90 days 

• (1) MK-21 Hand Held Vibration Meter
• (1) Wrist strap
• (1) Probe and cable assembly
• (1) One AA alkaline battery
• (1) Instruction manual
• (1) Hard plastic carrying

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice