• Part Number: 2727851
• 27 ranges/10 functions
• Battery load test with 1.5 V and 9 V capabilities
• Data Hold
• Min/Max record minimum and maximum values
• VolTect non-contact voltage (NVC) detection
• Low battery indication
• Safety rated CAT II 600 V, CAT III 300 V

• General Specifications:
• Display: 3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999
• Polarity: Automatic, positive implied, negative polarity indication
• Overrange: (OL) or (-OL) is displayed
• Zero: Automatic
• Low Battery Indication: The Indication is displayed when the battery voltage drops below the operating level
• Measurement Rate: 2.5 times per second, nominal
• Operating Environment: 0 °C to 50 °C at <70 % R.H.
• Storage Temperature: -20 ?C to 60 ?C, 0 to 80 % R.H. with battery removed from meter
• Accuracy: Stated accuracy at 23 °C ? 5 °C, <75 % relative humidity
• Temperature Coefficient: 0.1 x (specified accuracy) per °C (0 °C to 18 °C, 28 °C to 50 °C)
• Altitude: 2000 m (6561.7 ft)
• Power: Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
• Battery Life: 200 hours typical with carbon-zinc
• Dimensions: (H x W x D) 155 mm x 72 mm x 32 mm (6.1 in x 2.8 in x 1.3 in)
• Weight: Approx. 210 g (7.4 oz) including battery
• Warranty: One-year
• Electrical Specifications:
• DC Volts Ranges: 200 mV, 2 V, 20 V, 200 V, 1000 V Accuracy: ? (1.0 % rdg + 1 dgt)
• AC Volts (45 Hz to 500 Hz) Ranges: 200 mV, 2 V, 20 V, 200 V, 750 V Accuracy: ? (1.5 % rdg + 5 dgts)
• Voltage Resolution: 100 µV
• Voltage Input Impedance: 10 Mω
• Overload Protection: 200 mV: 1000 V dc or 750 V ac rms (3 minutes) All other ranges: 1000 V dc or 750 V ac rms
• DC Current Ranges: 200 µA, 2 mA, 20 mA, 200 mA Accuracy: ? (1.5 % rdg + 1 dgt)
• AC Current (45 Hz to 500 Hz) Ranges: 200 µA, 2 mA, 20 mA, 200 mA Accuracy: ? (2.0 % rdg + 5 dgts)
• Current Resolution: 0.1 µA
• Input Protection:  315 mA/1000 V fast blow ceramic fuse 6.3 mm x 32 mm on mA input
• Burden Voltage: 300 mV max. (1 V max. on 200 mA range)
• Resistance: 200 ω , 2 kω , 20 kω , 200 kω ? (1.0 % rdg + 4 dgts)
• Resistance: 2 Mω ? (1.5 % rdg + 4 dgts)
• Resistance: 20 Mω ? (2.0 % rdg + 5 dgts)
• Resistance Resolution : 100 mω
• Open Circuit Voltage: 0.3 V dc typical, (3.0 V dc on 200 ω range)
• Overload Protection: 1000 V dc or 750 V ac rms
• Continuity: Audible Indication: 75 ω ? 25 ω, Response Time: 100 ms
• Diode Test Current: 1.0 mA (approximate) ?(1.5 % rdg + 3 dgts)
• Diode Test Resolution: 1 mV
• Open Circuit Voltage: 3.0 V dc typical
• Non-Contact Voltage Indicator: Sense voltage 70 V to 600 V ac; beeper chirps and bright red LED on, works on all ranges
• Battery Test: 1.5 V, 9 V Accuracy: ? (3.5 % rdg + 2 dgts)

• (1) 5XP-A AC/DC Compact Digital Multimeter with VolTect
• (1) Magne-Grip™ holder with hanging strap
• (1) Test leads
• (1) Carrying case
• (1) Instruction Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice