• Part Number: SDL800
• Acceleration: 656ft/s2 , 200m/s2 , 20.39g
  
• Velocity: 7.87in/s, 200mm/s, 19.99cm/s
• NIST Calibration: Not included
• Remote vibration sensor with magnetic adapter on 47.2" (1.2m) cable
• Wide frequency range of 10Hz to 1kHz
• Basic accuracy of ±(5% + 2 digits); Meets ISO2954
• RMS, Peak Value or Max Hold measurement modes
• Adjustable data sampling rate
• Offset adjustment used for zero function to make relative measurements
• Large backlit LCD
• Stores 99 readings manually and continuous datalogging via SD memory card
• Record/Recall MIN, MAX, Data Hold and Auto power off
• Applications:
• Motors, Bearings, Fans, Pumps, Rotating Machinery
  
• Automotive
• Manufacturing
• HVAC/R
• Motors, Bearings, Fans, Pumps, Rotating Machinery

• Acceleration: 656ft/s2, 200m/s2, 20.39g
• Velocity; 7.87in/s, 200mm/s, 19.99cm/s
• Displacement: 0.078in, 2mm (peak-to-peak)
• Resolution: 1ft/s2, 0.1m/s2, 0.01g; 0.01in/s, 0.1mm/s, 0.01cm/s, 0.001in, 0.001mm
• Basic accuracy: ±(5%+2 digits)
• General Specification:
• Display Backlit LCD; LCD size: 52 x 38mm (2 x 1.5”)
• Status indicators Over-range audible beep and low battery display icon
• Frequency Range 10Hz to 1kHz
• Datalogger Sampling Rate AUTO LOGGING: From 1 to 3600 seconds.
• MANUAL LOGGING: Set the sampling rate to ‘0’ seconds
• Memory: Card SD memory card; 1G to 16GB size
• Data Hold: Freeze the displayed reading
• Memory Recall:  Record and Recall the Maximum and Minimum readings
• Display update rate:  Approx. 1 second
• Data Output: RS-232 / USB PC computer interface
• Operating Temperature: 0 to 50°C (32 to 122°F)
• Operating Humidity: 85% R.H. max.
• Auto Power OFF: After 10 minutes of inactivity (can be disabled)
• Power Supply: Six (6) 1.5 VDC batteries (optional 9V AC adaptor)
• Power Consumption: Normal operation (backlight and datalogger OFF): approx. 5mAdc
• With backlight: OFF and datalogging ON: approx. 25mAdc
• With backlight: ON add approx. 12mAdc
• Weight: 343g (0.75 lbs.) w/ batteries; 241g (0.53 lbs.) w/o batteries
• Dimensions: Meter: 182 x 73 x 47.5mm (7.1 x 2.9 x 1.9”)
• Vibration sensor: round 16mm (0.63”) diameter, 37mm (1.46”) length 

• (1) Vibration Meter/Datalogger
  
• (1) SD Card
• (1) Remote Sensor with Magnetic Adapter on Cable
• (1) Magnetic Mount
• (1) Hard Carrying Case
• (6) AA Batteries

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice