• Part Number: HD700
  
• Range:  (0 - 2psi)
• NIST Calibration: Not included
• Measure gauge or differential pressures from 0 to 2 psi in 11 selectable units of measure
• LCD digital display with backlighting
• Zero function for offset correction or measurement
• Max/Min/Avg recording and Relative time stamp
• Data Hold and Auto power off
• Rugged double moulded housing with built-in stand
• Built-in USB port

• Display: Four digit LCD with function indicators
• Units of Measure : BAR, mBAR, psi, kg/cm2, mm Hg, inches Hg, kPa, feet H2O, inches H2O, cm H2O, and oz in2
• Accuracy: ±0.3%FS (@ 25°C)
• Repeatability: ±0.2% to 0.5% FS
• Linearity/Hysteresis: ±0.3%FS
• Combined Accuracy: ±1.1%FS
• Maximum Pressure: 10psi
• Response time: 0.5s typical
• Input circuit: Differential inputs (P1 and P2)
• Input Ports: Two metal 4.8mm, barbed for 1/8" (3.17mm) ID tubing
• Data Hold: Freezes displayed reading
• Sensor: Built-in piezoelectric sensors
• Zero / Offset function: Pushbutton activation
• Sample rate: 0.5 sec. (approx.)
• Compatibility: Air or non-corrosive and non-ionized gas (not intended for
• use with liquids)
• Auto Power OFF Meter turns off after approx. 20 minutes to conserve energy (can be deactivated)
• PC Interface: Built-in USB serial interface
• Storage conditions: 14 to 140°F (0 to 60°C); < 80% RH
• Operating conditions: 32 to 122°F (0 to 50°C); < 80% RH
• Battery power: 9V alkaline battery (BAT low battery indicator)
• Battery life: 125 hours typical
• Dimensions: 8.2 x 2.9 x 1.9” (210 x 75 x 50mm)
• Weight:  9.8oz (280g) 

• (1) Differential Pressure Manometer
• (2) Connection Hoses
• (1) Windows Compatible Software with USB Cable
• (1) Switching AC Adaptor
• (1) Hard Carrying Case
• (1) 9V Battery

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice