Checkline PaintCheck Paint Thickness Gauge

PaintCheck provides fast, non-destructive coating thickness measurements on steel and non-ferrous metals. It is intended for use by car dealerships, auto body shops , insurance adjusters and similar users who only need a simple, one-handed basic gauge. The resolution is limited to 0.5 mils (5 µm) and should not be confused with our other "precision" gauges as this is adequate for basic thickness "checks".

Simply place the gauge on the surface to be tested. An accurate thickness reading appears almost instantaneously on the large, easy-to-read display—without scratching or damaging the surface in any way.

PaintCheck automatically selects the optimum measuring method (magnetic induction or eddy-current) to provide an accurate reading even for the thinnest coatings, on steel as well as on aluminum and other non-ferrous metals. No calibration is required.

In addition, PaintCheck provides valuable information about the coating structure, such as paint top coats or body fillers. For example, if the measured thickness value is significantly greater than the expected paint thickness, this would indicate the use of filler material or repainting.

Speed, accuracy, versatility and ease of use make PaintCheck a valuable tool for a wide range of paint inspection tasks.

Features:

---

• Large measuring range: 0 – 80 mils (0 – 2000 µm)
• Simple, one-key operation
• User-selectable units: mils or µm
• Measures on steel, aluminum and non-ferrous metals
• No calibration required

What's In The Box:

---

• (1) Gauge
• (1) Plastic test shim
• (1) Steel zero test plate
• (1) Aluminum zero test plate
• (2) AAA batteries
• (1) Manual
• (1) Soft carrying pouch

Brochure/Datasheet

---

Instruction manual

Note: Prices are not binding , subject to change without prior notice