Display
Hi-resolution (640×480 pixels) full digital TFT LCD with adjustable brightness, it is capable of providing high contrast viewing of the waveform from bright, direct sunlight to complete darkness.
The hi-resolution TFT LCD display with fast 60 Hz update gives an "analog look" to the waveform providing detailed information that is critical in many applications including nuclear power plant inspections.

Range
Up to 9999 mm in steel; range selectable in fixed steps or continuously variable, suitable for use on large work pieces and in high-resolution measurements.

Pulse
Pulse Energy selectable among 200V, 300V, 400V, 500V
Pulse Width tunable from 30ns to 510ns to match the probes with different frequency
Pulse Repetition Frequency adjustable from 10 Hz to 1 KHz in 1 Hz increments
Damping selectable among 200Ω and 500Ω for optimum probe performance
Test Modes including Straight, Angle, Dual and Thru-transmission

Receiver
Sampling:10 digits AD Converter at the sampling speed of 400 MHz
Rectification:Positive Halfwave, Negative Halfwave, Fullwave and RF
Analog Bandwidth: 0.2MHz to 20MHz capability with selectable frequency ranges (automatically set by the instrument) to match probe for optimum performance.
Gain:0 dB to 110 dB adjustable in selectable steps 0.1 dB, 2 dB, 6 dB, and locked

Gates
Two fully independent gates offer a range of measurement options for signal height or distance using peak triggering.
The echo-to-echo mode allows accurate gate positioning for signals which are extremely close together.
Gate Start: Variable over entire displayed range
Gate Width: Variable from Gate Start to end of displayed range
Gate Height: Variable from 0 to 99% Full Screen Height
Alarms: Threshold positive/negative

Memory
Memory of 100 channel files to store calibration set-ups
Memory of 1000 wave files to store A-Scan patterns and instrument settings.
All the files can be stored, recalled and cleared.

Video Recorder
Screen scenes can be captured as movie files. More than 10 hours movie can be saved to the inside memory. They can be re-played using the instrument or the PC software delivered with the instrument.
Video Recorder is useful in many situations, convenient for those who want to analyze the probing activities later.

Specifications

• (1) Main unit
  
• (1) 4Mhz, 10mm Straight beam probe
• (1) 4Mhz, 4MHz 8*9, 60° Angle beam probe
  
• (1) Probe cable
  
• (1) Battery module
  
• (1) Power adapter (charger)
  
• (1) Instrument case
• (2) Support pillar
• (1) USB communication cable
  
• (1) Data processing software
  
• (1) Manual
• (1) Product certificate
• (1) Warranty card
• (1) Packing list

Brochure/Datasheet

Instruction manual

Download

Note: Prices are not binding at any time subject to change without prior notice