Dakota Ultrasonics CMXDLP [CMXDLP-H] Combination Coating & Wall Thickness Gauge w/ T-102-2900-H High Temp Probe, up to 300 F (150 °C)

• Special:
• Built-in memory with RS-232 output for transferring data to a Printer or PC
• Includes Datacomm Data Transfer & Analysis Software and RS-232 Cable, FREE
• Data Files can be user-set for a "grid type" structure where data is formatted in Rows & Columns or a "sequential" file where all data appears in a single column 
• Each "grid type" File can be set for up to 999 rows by 52 columns
• Each "sequential" File can be set for up to 512 rows by 1 column
• Each File can be set for "data only" or as "data plus B-scan Graphic". Memory Capacity is over 225,000 data values or over 16,000 data values with B-scan
• Features:
• Auto probe recognition with Auto Zero or Manual Zero.
• Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db).
• Wide variety of dual-element probes can be used for nearly any application.
• 64 custom setups can be stored and retrieved for convenient use and labeled for easy identification
• Bar graph with user-set start end values providing highest resolution around the target thickness value.
• Display Hi/Lo Alarm Limits with audible and visual indicators.
• Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value.
• 2 Year Warranty and CE-Certified
• Includes NIST-Traceable Calibration.
• Metal housing provides strong protection against harsh environments.
• T-8071-0868 Probe to 1"-1MHz Single-Element Membrane Probe to measure Blow Holes in Thick PE Pipes and Fittings
• Measures Coatings up to 0.100"

• Range in Steel:
• Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters)
• Echo-Echo Mode: Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thick
• Range in Coating Only Mode: 0.0005" - 0.1000" / Resolution: 0.0001" (0.013 - 2.540 mm / Resolution: 0.001 mm)
• Max Coating; 0.100"
• Resolution: .001 inches (0.01mm)
• Velocity Range: .0492 to .3936 in./ms (1250 to 9999 meters/sec)
• Units: Inch or mm
• Measurement Modes:
• Pulse-Echo (corrosion mode)
• Pulse-Echo Coating (Corrosion w/o coating)
• Echo-Echo (thru-paint)
• Temp Comp (auto adjust for material temp)
• Coating Only (Ultrasonic Coating Gauge)
• Transducer Types: Dual Element (1 to 10 MHz).
• Output: RS-232 for upload/download of setups
• Memory capacity: TI-CMX: None; TI-CMXDL: over 200,000 measurements
• Power Source; Three 1.5V alkaline or 1.2V NiCad AA cells
• Battery Life: Typically operates for 150 hours on alkaline and 100 hours on NiCad
• Auto Power off: After 5 minutes of non-use
• Display; 1/8 in. VGA grayscale display 62 x 45.7mm
• Keyboard: Membrane switch with twelve tactile keys
• Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
• Temp. Limits: Ambient: -20 to 120° F (-30 to 50° C); Material: -0 to 200° F (-20 to 100° C)
• Special high temperature model TI-CMXDL-H is available for 300°F/150°C and optional probes are offered for higher surface temperatures
• Weight, net: 383 grams
• Dimensions: 63.5 W x 165 H x 31.5 D mm
• Warranty; 2 year limited
• Certification: CE Approved, Factory calibration traceable to national standards

• (1) Dakota Ultrasonics CMXDLP Data-Logging Ultrasonic Coating and Wall Thickness Gauge
  
• (1) High Temp Transducer Probe
• (1) 4 oz. bottle of coupling fluid
• (2) AA batteries
• (1) NIST-Traceable Calibration Certificate
• (1) RS-232 cable and data-transfer software
• (1) Operating manual
• (1) Carrying case

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding , subject to change without prior notice