• Includes NIST-Traceable Calibration.
• Auto probe recognition with Auto Zero or Manual Zero.
• Wide variety of dual-element probes can be used for nearly any application.
• Bar graph with user-set start end values providing highest resolution around the target thickness value.
• Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value.
• TI-CMX-H for surface temps up to 300°F/150°C. Optional hi-temp probes for higher surface temperatures offered
• Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db).
• 64 custom setups can be stored and retrieved for convenient use and labeled for easy identification
• Display Hi/Lo Alarm Limits with audible and visual indicators.
• Metal housing provides strong protection against harsh environments.
• Measures Coatings up to 0.100"
• IP 65 Rated
• CE Certified
• Warranty: Gauge: 2 Years Probes: 90 Days
• Made in USA

• Range in Steel:
• Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters)
• Echo-Echo Mode: Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thickness
• Range in Coating Only Mode: 0.0005" - 0.1000" / Resolution: 0.0001" (0.013 - 2.540 mm / Resolution: 0.001 mm)
• Max Coating: 0.100"
• Resolution: .001 inches (0.01mm)
• Velocity Range: .0492 to .3936 in./ms (1250 to 9999 meters/sec)
• Units: Inch or mm
• Measurement Modes: - Pulse-Echo (corrosion mode); Pulse-Echo Coating (Corrosion w/o coating);  Echo-Echo (thru-paint);  Temp Comp (auto adjust for material temp);  Coating Only (Ultrasonic Coating Gauge)
• Transducer Types: Dual Element (1 to 10 MHz).
• Output: RS-232 for upload/download of setups
• Memory capacity: TI-CMX: None; TI-CMXDL: over 200,000 measurements
• Power Source: Three 1.5V alkaline or 1.2V NiCad AA cells
• Battery Life: Typically operates for 150 hours on alkaline and 100 hours on NiCad
• Auto Power off: After 5 minutes of non-use
• Display: 1/8 in. VGA grayscale display 62 x 45.7mm
• Keyboard: Membrane switch with twelve tactile keys
• Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
• Temp. Limits: Ambient: -20 to 120° F (-30 to 50° C); Material: -0 to 200° F (-20 to 100° C). Special high temperature model TI-CMXDL-H is available for 300°F/150°C and optional probes are offered for higher surface temperatures
• Weight, net: 383 grams
• Dimensions: 63.5 W x 165 H x 31.5 D mm
• Warranty: 2 Year Warranty for Gauge (90 days for probe)
• Certification: CE Approved, Factory calibration traceable to national standards

• (1) Checkline TI-CMXDL Data-Logging Ultrasonic Coating and Wall Thickness Gauge
• (1) Probe
• (1) 4 oz. bottle of coupling fluid
• (2) AA batteries
• (1) NIST Calibration Certificate
• (1) RS-232 cable
• (1) Data-transfer software
• (1) Operating manual
• (1) Carrying case

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice