• Part Number: P01139715
• Test voltage: 500 V, 1000 V, 2500 V, 5000 V, 10000 V 25 TΩ
• Fixed or programmable test voltage from 40 V to 10/15 kV
• Measures insulation resistance up to 25TΩ
• Five selectable test voltages of 500V, 1000V, 2500V, 5000V and 10000V
• Go/No Go testing
• Tests with programmable duration
• Polarisation index, dielectric absorption ratio and dielectric discharge testing
• Fixed voltage mode
• Ramp mode
• Step mode
• Voltage, capacitance and leakage current measurements
• Calculation of R at reference temperature
• Graphical display
• Built inside its own protective carrying case
• Large size memory stores thousands of measurements (with download options)
• Rechargeable Batteries

• Test voltages:
  
• Ranges: 500 V: 10 kΩ to 2 TΩ; 1,000 V: 10 kΩ to 4 TΩ; 2,500 V: 10 kΩ to 10 TΩ; 5,000 V: 10 kΩ to 15 TΩ; 10,000 V: 10 kΩ to 25 TΩ
• Fixed test voltages: 500 / 1,000 / 2,500 / 5,000 / 10,000 V
• Variable test voltages: 40 V - 10,000 V; 3 presettable voltage values
• Adjustment increment for variable voltages: Variable: 40-10 kV step : 40 V-1 kV: 10 V; 1 kV-10 kV: 100 V
• Ramp mode: 3 presettable ramps: start voltage / end voltage / duration
• Ramp configuration range: 40-1,100 V / 500-10,000 V
• Step mode: Up to 10 steps (values and duration configurable for each step)
• Voltage measurement after test:  AC: 0 – 2,500 V / DC: 0 – 4,000 V
• Capacitance measurement:  0.001-9.999 µF / 10,00 - 19,99 µF
• Leakage current measurement: - 0 - 8 mA
• Discharge after test: Yes / Automatic
• Additional test stop modes: 
  
• I-limite: Programmable: 0.2-5 mA
• Early-break: di/dt
• Timer: Up to 99 minutes 59 seconds
• Burning mode: Burning: Constant testing
• Ratio calculation: - PI, DAR, DD
• Calculation of R at ref. T°: Yes
• Measurement display lter: 3 lters with 3 possible time-constant
• Graphs on display: R(t)+u(t); i(t); i(u);
• Storage:  256 enregistrements, 80 000 points R, U, I et datation
• Communication: Optically-isolated port for USB links
• PC software: DataView®
  
• Power supply: NiMH rechargeable batteries, 8x 1.2 V / 4,000 mAh charging by external voltage: 90-260 V 50/60 Hz
• Battery charging: Battery charging possible while performing insulation measurements
• Electrical safety: 1,000 V CAT IV - IEC 61010-1 and IEC 61557 | IEC 61010-031 accessories
• EMC, mechanical protection, altitude: EN 61326-1, IP54, 2,000 m
  
• Dimensions and weight: LxWxH: 340 x 300 x 200 mm, 6.2 kg approx. (excluding accessories)

• (1) CA6550 - Digital Megohmmeter
• (1) Carrying Bag
• (2) 3m Safety Leads with HV Plugs (Red/Blue)
• (1) 3m Guard Test Leads with HV Plug and Rear Connector (Black
• (3) Crocodile Clips (Red, Blue and Black)
• (2) CAT IV 1000V Test Probes (Red/Black
• (1) Blue Lead with Rear Connection
• (1) 2m Mains Power Cable
• (1) DataView Software Package
• (1) Optical/USB Communication Lead
• (1) Operating Manual (CD-ROM and Print)
• (5) Specification Labels

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice