• Part Number: P01174810
• rpm function range: 60 to 100,000 rpm
• m/min function range:  6 to 10,000 m/min
• Hz function range: 1 to 10,000 Hz
• ms function range:  0.1 to 1,000 ms
• Duty cycle function range: 0.1 to 100 %
• Count function (C.A 1727) range: 0 to 100,000 events
• RP measurements in tr/min and m/min
• Frequency and ms measurements
• Duty %, RPM and ft/min
• Portable device
• Infrared and contact RPM measurements
• MIN/MAX
• Smoothing function
• Data hold function

• Metrological specifications:
  
• rpm function: Range: 60 to 100,000 rpm; Resolution: 0.006 to 6 according calibre; Accuracy: 1 x 10-4 of reading ± 6 counts
• m/min function: Range: 6 to 10,000 m/min; Resolution: 0.006 to 6 depending on calibre; Accuracy:1 x 10-4 of reading ± 1 increment
• Hz function: Range: 1 to 10,000 Hz; Resolution: 0.004 to 0.4 depending on calibre; Accuracy: 4 x 10-5 of reading ± 4 counts
• ms function: Range: 0.1 to 1,000 ms; Resolution: 0.0003 to 0.03 depending on calibre; Accuracy: 1 x 10-4 of reading ± 5 counts
• Duty cycle function: Range: 0.1 to 100 %; Resolution: 0.1 to 1 % depending on calibre; Accuracy: 0.1 % of scale from 0.2 Hz to 50 Hz; 0.2 % of scale from 50 Hz to 125 Hz; 1 % of scale otherwise
• Count function (C.A 1727): Range: 0 to 100,000 events; Accuracy: ± 1 event
  
• General specifications:
  
• Power supply: 9 V
• Battery life: 250 x 5 min measurements with optical sensor; 600 x 5 min measurements with external sensor
• Memory (C.A 1727): 4,000 points
• Dimensions: 21 x 72 x 47 mm
• Weight: 250 g
• Leakproofing: IP 51
• Environment: Storage: -20 °C to +70 °C 95 % RH
• Operation: 0 to 55°C 90 % RH
• Optical Sensor Specs: Reflective area: 10 to 90 % of the target area.
• Measurement distance: 1 to 50 cm. The maximum distance is given for a reflective adhesive strip with a minimum area of 10 cm2.
• Measurement angle: ± 15° in relation to the perpendicular of the reflective surface.
• Mechanical Adapter Specs: End-fittings: elastomer with a hardness of 80 shores
• Pressure on moving part: between 2 and 40 N.
• Maximum speed: 10,000 rpm.
• Service life: approx. 1,000 hours at 3000 rpm with a pressure of 20
• Conical End Fitting Accessory Specs: Minimum diameter of measurement shaft: 5 mm.
• Cylindrical End-Fitting Accessory Specs: Speed measurements on shafts with a diameter greater than 5 mm or flat-ended shafts
• End-Fitting Accessory (with Wheel) Specs: Wheel diameter: 30.183 mm.
• Wheel development: 10 cm ± 0.1 mm

• (1) CA1727 - Tachometer
• (1) Hard Carrying Case
• (1) FRB F Connector
• (1) 9V Battery
• (1) Set of 15 Reflective Strips (0.1m Length)
• (1) Operating Manual
• (1) Quick-Start Up Guide

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice