• Measurement Range: 80 mA to 30 kA
• 4 calibres
• Sensor Length (clamping diameter): 45 cm, 80 cm or 1.20 m (Ø14 cm, Ø25 cm, Ø38 cm)
• Ingress protection of sensor/processing unit: IP67/IP54
• Output Signal: AC voltage
• Output via two-wire lead terminated by 2 x Ø 4 mm straight male banana safety connectors
• Power Supply: 2 x 1.5 V AA batteries or external μUSB type B 5 V
• Battery Life: 300 hours
• 1000 V CAT IV
• Single phase flexible current sensors
• IP67

• ELECTRICAL SPECIFICATIONS (1):
• Operating voltage:1,000 VRMS (Cat. IV)
• Battery: 2 x 1.5 V batteries (NEDA 15A, IEC LR6, AA); +5 VDC with a type B micro-USB connector
• Battery life (2): 300 hours typical; 1,800 10-minute approx. measurements
• Consumption: 10 µA (position OFF); 90 µA (sleep mode)
• Battery level indication: Flashing green LED (batteries voltage > 2 V)
• Influence of battery voltage: ≤ 0.1 % (0.02 % typical) from 3.1 V to 2 V
• Influence of temperature: ≤ 0.5 % (0.15 % typical) of output signal per 10 °K
• Influence of relative humidity: ≤ 0.5 % (0.2 % typical) of output signal
• Influence of conductor position in the sensor(3): ≤ 2.5 % (1 % typical)
• Influence of sensor deformation (4): ≤ 1 % (0.2 % typical)
• Influence of adjacent conductor (5): ≤ IADJ x 1 % (2 % near click-lock system) (0.2 % typical)
• Input impedance of the measuring instrument: ≥ 1 MΩ
• Common mode rejection (6): ≤ 80 dB (100 dB typical)
• Influence of the measurement instrument’s impedance Z: ≤ 0.1 % at 10 kΩ
• MECHANICAL SPECIFICATIONS:
• Clamping capacity: Model 45 cm: Ø max 7 cm; Model 80 cm: Ø max 12.5 cm
• Bending radius: ≥ 40 mm
• Operating temperature: -10 °C to +55 °C
• Storage temperature: -40 °C to +70 °C
• Max temperature of measured cable: 90 °C for 10 minutes max.
• Relative humidity for operation: 0 to 85 % RH decreasing linearly above 35 °C
• Operating altitude: 0 to 2,000 m
• Casing protection rating (leakproofi ng): Casing: IP54
• Flexible sensor: IP 67 According to IEC 60529 Ed. 2.2-2013
• Drop test: 1 m
• Self-extinguishing capability: Casing: UL94-V2; Sensor: UL94 V0
• Dimensions:
• Casing: 120 x 55 x 39 (overall)
• Connector lead: 2 m (connects sensor to casing)
• Length of output cable: 0.5 m
• Ø of sensor: 12 mm
• Connection cable Ø: 4 mm
• Weight: Model 45 mm: 450 g; Sensor: 30 g / 10 cm
• Colours: Sensor: red; Click-lock system: dark grey; Casing: dark grey
• Output: Two-wire cable with reinforced or double isolation terminated by 2 red and black Ø 4 mm isolated male banana plugs
• SAFETY SPECIFICATIONS:
• Electrical safety: Class II equipment with double or reinforced insulation between the primary and the secondary (winding connected to the connection cable) as per EN 61010-1 and 61010-2-032 Ed. 03-2012:
• Sensor: Type B; - 1,000 V Cat. IV pollution degree 2
• Casing: 600 V Cat. III between the terminals and the external enclosure of the casing
• Electromagnetic compatibility (EMC): Complies with the industrial environments according to EN 61326-1 Ed. 02-2012:
• Immunity to radiated fields: at 3 V/m, error ≤ 5 % of measurement range (criterion A)

• (1) A110 - Flexible current sensor
• (2) 1.5 V AA / LR6 alkaline batteries
• (1) User manual in 5 languages
• (1) Safety datasheet
• (1) Verification certificate

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice