• Part Number: DAS-220V-230V
• Power Supply : 15 V / 4 A max with main adapter (100 / 240 VAC)
• Portable 10-Channel Data Recorder without battery
• Wide 10-inch touchscreen TFT display
• 10 built-in universal analog inputs
• Versatile temperature measurements supporting thermocouples and Pt100 / Pt1000 temperature sensors
• Measure voltage to ± 100V, resistance to 10 kOhm and current (with optional shunt)
• 16-bit vertical resolution
• 32 GB internal solid state memory
• 12 logic input/output channels
• 4 timing logic input channels for pulse count, frequency and PWM measurements
• Free DasLab operating software
• Applications:
• Temperature logging with thermocouples and platinum resistance temperature sensors
• Voltage measurements down to ± 0.5 mV range
• 4-20 mA current loop measurements
• Frequency, pulse totalization and pulse  rotation measurements, which can be expressed in RPM (rotations per minute)

• Analog Channels:
• Analog Input Channels: 10 integrated channels
• DC Voltage:
• Ranges: ± (0.5, 1, 2.5, 5, 10, 25, 50, 100) mV± (0.5, 1, 2.5, 5, 10, 25, 50, 100) V
• Maximum input Voltage: 100 V DC
• Accuracy: 0.1% of the full scale ±10 µV
• Temperature with Thermocouples:
• Sensors Range by Type (Cold junction compensation: ±0.5 °C):
• J: -210 °C to 1200 °C
• K: -250 °C to 1370 °C
• T: -200 °C to 400 °C
• S: -50 °C to 1760 °C
• B: 200 °C to 1820 °C
• E: -250 °C to 1000 °C
• N: -250 °C to 1300 °C
• C: 0 °C to 2320 °C
• L: -200 °C to 900 °C
• Temperature with Pt100 and Pt1000:
• Current: 1 mA (Pt100), 100 µA (Pt1000)
• Range: -200 °C to 850 °C
• Measurements: 2 and 3 wires
• Accuracy (at 20 °C): 0.3 °C ±0.1% of reading
• Compensated Resistance: 2 wires 30 Ω max.; 3 wires 50 Ω max
• Resistance:
• Ranges: 1 kΩ and 10 kΩ
• Accuracy: 1 Ω (range 1 kΩ) and 10 Ω (range 10 kΩ)
• Logic Channels:
• Logic Input/Output:
• Number of Channels: 12
• Maximum Permitted Voltage: 24 V Cat I
• Input Impedance: 4.7 kΩ
• Sampling Rate: 1 ms max.
• Timing Input:
• Number of Channels: 4 (K1 to K4)
• Maximum Permitted Voltage: 24 V Cat I
• Input impedance: 4.7 kΩ
• Sampling Rate: 1 ms max.
• Pulse Counter: 0 to 10 Million, accuracy 0.1%
• Frequency Measurement: 1 Hz to 10 kHz, accuracy 0.1%
• PWM Measurement: 100 Hz to 2 kHz, accuracy 0.1%
• Alarm Output:
• Number of Channels: 4 Alarms (A, B, C, D)
• Output Level: 0 to 5 V
• Acquisition System:
• Resolution: 16 bit
• Acquisition System: Scan, one sample per channel
• Sampling Interval:
• V >50 mV: 1 ms to 20 min
• V ≤50 mV, thermocouples and Pt100 / Pt1000: 2 ms to 20 min
• Trigger: Date, delay, threshold, combination of thresholds (and/or), word on logic channels (and, or, slope, level)
• Pre-trigger: Variable from 0 to 100k samples
• General:
• Internal Flash Drive Size: 32 GB
• Maximum File Size: 2 GB
• Operating Temperature: 0 °C to 40 °C, 80% RH (no condensation)
• Storage Temperature:  -20 °C to 60 °C
• Display: 10” TFT touchscreen LCD, backlit, 1024 x 600 dots
• Power Supply: 15 V / 4 A max with main adapter (100 / 240 VAC)
• Interfaces: 2 x USB host, LAN (10/100 base-T with RJ45 socket)
• Battery (-BAT): Non removable, Lithium-ion
• Typical Battery Life (-BAT): 15 hours with standby mode, 10 hours without stand-by mode
• Safety Cat I 100 V, according to IEC61010-1
• Weight DAS220: 3.3 lbs (1.5 kg)
• DAS220-BAT:  4.5 lbs (2 kg)
• Dimensions (W x H x D): 2.6” x 11.7” x 6.9” (66 x 298 x 176 mm)

• (1) DAS220 - 10-Channel Data Recorder
• (1) Main adapter 100 / 240 V
• (1) 25 pin male connector (1) and backshell
• (1) 10 input connectors
• (1) Shoulder strap
• (1) Stylus
• (1) Soft wipe
• (1) Screwdriver
• (1) Calibration certificate and test report

Brochure/Datasheet

Instruction Manual

Display and view recorded data, Ver. 3.7

LabVIEW Driver, Ver. 1.0.0

---

Note: Prices are not binding at any time subject to change without prior notice