• AC, DC and AC+DC power source
  
• 3-Phase capability using 3 AC sources and the 3-Phase kit (TL983P-KIT)
• Low total harmonic distortion (THD) meets the IEC 61000-3-2 standard
• Comprehensive measurement capabilities
• Vrms, Arms, Vdc, +Apk, -Apk, inrush current, frequency, power factor, apparent power, reactive power, true power, and crest factor
• 0.98 power factor at AC input stage
• Built-in standard waveforms sine, square, clipped sine
• 30 built-in THD waveforms
• Amplifier mode with 1.2 kHz bandwidth for generating user-defined arbitrary waveforms
• Step, List and Pulse modes for generating power line disturbance (PLD) simulations. List mode supports 10 user-defined programs with up to 100 programmable steps
• Generate custom harmonic waveforms on a PC and download them to the instrument’s 5 non-volatile memory locations
• Digital I/O port supporting external trigger, transient indication, failure status indication, remote inhibit, RS232, and external analog output level programming interface
• Comprehensive protection modes OVP, OCP, OPP, OTP, fan failure, output timer and key lock
• LabVIEW™ driver and application software with soft panel for remote control available
• Control the AC source from a standard web browser via built-in web server
• Applications:
• Pre-compliance testing
• Simulate grid faults, voltage sags,frequency, and phase disturbances, according to IEC61000-4-11/14/28/34
• Electromagnetic compatibility (EMC), according to IEC61000-3-2
• Consumer electronics, appliances, industrial controls, avionics
• Evaluate transformers, TRIACs, SCRs, and passive components

• Max. Power: 
• 9832B: 2000 VA
• 9833B: 3000 VA
• Max. Voltage: 
• AC (rms): 150 V / 300 V
• DC:  ± 212 V / ± 424 V
• Max. Current (rms):
• 0 - 150 V: 9832B: 20 A, 9833B: 30 A
• 0 - 300 V: 9832B:10 A, 9833B: 15 A
• Frequency Range: 
• Single phase: 45 Hz to 1200 Hz
• 3-Phase: 45 Hz to 600 Hz
• Total Harmonic Distortion (THD):  ≤ 0.5 % at 45 Hz to 400 Hz (resistive load)
• Remote Interface:  LAN, USB, GPIB, and RS232
• General:
• Analog BNC Input:  Input Voltage Range: 0 to ± 10 V, Input Impedance: 200 kΩ, Bandwidth: 1.2 kHz
• Storage Memory:  10 programs, up to 100 steps total (List mode), 5 memory locations for user-defined waveforms, 9 instrument settings
• Remote Interface: Analog programming6, USB (USBTMC or virtual COM), RS2325, GPIB, and Ethernet
• Command Response time:  50 ms
• Protection: OVP, OCP, OPP, OTP
• Operating Temperature: 32 °F to 104 °F (0 °C to 40 °C)
• Storage Temperature:  -40 °F to 185 °F (-40 °C to 85 °C)
• Environmental Conditions ≤ 80% Relative Humidity up to 35 ºC, non-condensing
• Dimensions (W x H x D): 16.5” x 5.2” x 22” (420 x 132 x 560 mm)
• Weight: 52.9 lbs (24 kg)
• Warranty: 3 Years
• Included Accessories: AC power cord with input connector, test report & certificate of calibration. Optional Accessories Rackmount ears with handles (RK3U) & 3-Phase sync adapter (TL983P), 3-Phase kit (TL983P-KIT)
• NOTE: For complete specifications. Please see Brochure/Datasheet
  
  

• (1) Programmable AC Power Source
• (1) Unterminated Power cord with Input Connector
• (1) Rackmount ears and handles
• (1) Test report
• (1) Certificate of Calibration
• (1) Instruction manual

Brochure/Data Sheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice