• Part Number: 9805B-220V
• Same features as 9805 without GPIB
• Output Voltage: 0-300V
• Output Current: 12A at 0-150V , 6A at 0-300V
• Max Power: 1500VA
• Input Voltage: 220VAC, 47 - 63 Hz
• Dimensions (WxHxD): 17.3 in. x 5.2 in. x 21.1 in.
• Select 150V/300V auto-ranging or 300V range operation for continuous sweep from 0-300V
• Displays Vrms, Irms, Ipeak, frequency, PF, apparent power, true power, and elapsed output time
• Built-in PLD and dimmer simulation
• List mode: 10 user-defined programs with up to 100 programmable steps each
• BNC I/O for external triggering, output status indication/control, and synchronization
• Save and recall up to 100 instrument settings
• PC software is provided for front panel emulation

• AC Input:
• Phase Single:
• Voltage: 110 / 220 VAC ± 10%
• Frequency: 47 to 63 Hz
• Max. Current: 30 A max
• Power Factor: 0.7 (typical)
• AC Output:
• Max. Power: 1500 VA
• Max. Current (rms): 
• 0 to 150 V: 12 A
  
• 0 to 300 V: 6 A
  
• Max. Current (peak):
• 0 to 150 V: 36 A
  
• 0 to 300 V: 18 A
  
• Crest Factor: 3
• Phase: Single
• Total Harmonic Distortion (THD): ≤0.5% at 45 to 500 Hz (Resistive load)
• Line Regulation: 0.1% max for a ±10% line change
• Load Regulation: ≤0.5% FS (Resistive load)
• Response Time: <100 µs
• Programming:
• Voltage (rms):
• Range: 0 to 300 V, 150 V / 300 V (Auto)
  
• Resolution: 0.1 V
  
• Accuracy: ±(0.2% + 0.6 V)
  
• Frequency: 
• Range: 45 to 500 Hz
  
• Resolution: 0.1 Hz at 45 to 99.9 Hz, 1 Hz at 100 to 500 Hz
  
• Accuracy: ±0.1 Hz (100 Hz), ±1 Hz (100 to 500 Hz)
  
• Phase Angle:
• Range; 0 to 360°
  
• Resolution: 0.1°
  
• Accuracy: ±1° (45 to 65 Hz)
  
• Note: All specifications apply to the unit after a temperature stabilization time of 15 minutes over an ambient temperature range of 23 °C ± 5 °C.
• * The current range switches from low to mid range or mid to high range when
• Ipeak > 300% of the present range.
• When Ipeak is <80 % of the high range, the current range switches from high to mid range.
• When Ipeak is <20 % of the mid range, the current range switches from mid to low range.
• Measurements:
• Voltage (rms):
• Range: 0 to 300 V
  
• Resolution: 0.1 V
  
• Accuracy: ±(0.2% + 0.6 V)
  
• Current (rms): 
  
• Range: Low: 120.0 mA / Mid: 1.200 A / High: 12.00 A
  
• Resolution Low: 0.1 mA / Mid:1 mA / High: 10 mA
  
• Accuracy Low: ±(0.2% + 0.4 mA) / Mid: ±(0.2% + 4 mA) /High: ±(0.2% + 20 mA)
  
• Current (peak): 
• Range: 0 to 36 A
  
• Resolution: 0.01 A
  
• Accuracy: ±(1% + 120 mA)
  
• True Power (watts): 
• Resolution Low: 0.01 W / Mid:0.1 W / High: 1 W
  
• Accuracy (47 to 65 Hz): Low: ±(0.2% + 0.05 W) / Mid: ±(0.2% + 0.5 W) /High: ±(0.2% + 2 W)
  
• Frequency:
• Range: 45 to 500 Hz
  
• Resolution: ±0.1 Hz (45 to 99.9 Hz), ±1 Hz (100 to 500 Hz)
  
• Accuracy: ±0.1 Hz
  
• Power Factor:
• Range: 0.000 to 1.000
  
• Resolution: 0.001
  
• Apparent Power (VA): 
• Resolution Low: 0.01 VA / Mid:0.1 VA / High: 1 VA
  
• Accuracy Voltage (rms) x Current (rms)
  
• Temperature Coefficient (typical): ±0.04% per ºC
• General:
• Memory: 10 Locations
• External: BNC I/O Trigger input, sync output, output status, output indicator/control
• Interface: LAN, USB, RS232 LAN, USB, RS232, & GPIB (optional)
• Operating Temperature: 32 °F to 104 °F (0 °C to 40 °C) 20 - 80% R.H.
• Storage Temperature: -4 °F to 158 °F (-20 °C to 70 °C) ≤ 85% R.H.
• Environmental: conditions For indoor use only, max humidity 80%, no condensation
• Dimensions: (W x H x D): 17.3” x 5.2” x 21.1” (439 x 131.4 x 535.7 mm)
• Weight: 20.94 lb (9.5 kg) 88.2 lb (40 kg)

• (1) 9805B - Programmable AC Power Source
• (1) Unterminated Power cord with Input Connector
• (1) Rackmount ears and handles
• (1) Test report
• (1) Certificate of Calibration
• (1) Instruction manual

Brochure/Datasheet

Instruction Manual

LabVIEW 2020 Drivers 1.0.1

Operating Software (Supports Windows(R) 7/8/8.1/10), Ver. 1.0.7

Operating Software w/ LabVIEW 2014 Run-Time Engine (Supports Windows(R) 7/8/8.1/10),  Ver.1.0.7

Note: Prices are not binding at any time subject to change without prior notice