• Part Number: 4079C-GPIB-220V
• Two channels
• 50MHz maximum frequency
• This model includes a GPIB interface
• Up to 250 MSa/s sampling rate
• User defined arbitrary waveform length up to 4 Mpts/ch
• Amplitude range of 0 to 10 Vpp into 50 Ω or up to 20 Vpp into an open circuit
• 16-bit amplitude resolution
• Modulation techniques include: AM, FM, PM, BPSK, and FSK
• Variable DC offset ± 5 V
• Low jitter < 25 ps

• Maximum Frequency: 4078C: 30 MHz, 4079C: 50 MHz
• Waveforms:
• Standard Sine, Square, Triangle/Ramp, Pulse
• Built-in Arbitrary: Sine, Triangle, Square, Noise, Ramp Up, Ramp Down, Sine(X)/X, Exponential Up, Exponential Down, Gaussian, Lorentz, Haversine
• User-defined Arbitrary: 4 Mpts
• Operating Modes:
• Operating Modes: Continuous, Triggered, Burst, Gated, Phase
• Triggered: Frequency of waveform cycle is limited to 10 MHz
• Sine:
• Frequency Range: 4078C:  1 mHz to 30 MHz, 4079C: 1 mHz to 50 MHz
• Resolution: 1 μHz
• Amplitude Flatness (relative to 1 kHz, 5 Vpp output): 
• fOUT ≤ 5 MHz:  ± 0.15 dB
• fOUT: 5 MHz to 20 MHz:  ± 0.3 dB
• fOUT: 20 MHz to 30 MHz: ± 0.4 dB
• fOUT: 30 MHz to 50 MHz; ± 1 dB
• Harmonic Distortion (typical):
• fOUT ≤ 20 kHz: ≤ -60 dBc
• fOUT ≤ 10 MHz: ≤ -45 dBc
• fOUT ≤ 20 MHz: ≤ -40 dBc
• fOUT ≤ 50 MHz: ≤ -30 dBc
• THD: 20 Hz to 20 kHz:  < 0.04%
• Spurious:
• fOUT ≤ 1 MHz -70 dBc
• fOUT ≥ 2 MHz -70 dBc to 1 MHz, increasing +20 dB/decade above 1 MHz
• Phase Noise (fout=10 MHz):
• 10 kHz offset: -110 dBc
• Square:
• Frequency Range: 4078C: 1 mHz to 30 MHz, 4079C: 1 mHz to 50 MHz
• Rise & Fall Time: < 5 ns (10% to 90%) at full amplitude into 50 Ω
• Overshoot (typical): < 2%
• Variable Duty Cycle Range:  fout ≥ 10 MHz : Set duty = 50 %; fout ≥ 100 kHz: Set duty 20% to 80%; fout < 100 kHz: Set duty 5% to 95%
• Duty Cycle Resolution: 0.1%
• Duty Cycle Accuracy: < ± 0.1% ± 5 ns
• Jitter (rms): < 40 ps rms
• Ramp & Triangle:
• Frequency Range 1 mHz to 5 MHz
• Resolution 1 μHz
• Variable Duty Cycle
• 0%-100% to 500 kHz
• 20%-80% to 2 MHz
• Fixed 50% to 5 MHz
• Duty Cycle Resolution 0.1%
• Linearity < 0.1% of signal amplitude from 5%-95%, up to 200 kHz
• Pulse:
• Frequency Range: 1 mHz to 10 MHz
• Resolution : 1 μHz
• Pulse Width : 20 ns minimum, 1 ns resolution, 999 s max
• Variable Edge Time: < 10 ns to pulse period (depending on pulse width)
• Jitter (rms): < 25 ps
• General:
• Display Resolution: 4.3" color LCD with IPS technology, 480 x 272 dots
• I/O interfaces: USB (USBTMC-compliant), LAN, GPIB (optional)
• Storage Memory: 99 full panel settings at power-off, including last working set-up 128 MB flash file system for arbitrary waveform storage
• Dimensions (W x H x D): 8.5” x 3.5” x 12” (214 mm x 88 mm x 300 mm)
• Weight : 5.5 lbs (2.5 kg)
• AC Input: 100 to 240 VAC (< 50 VA)
• Temperature: Operation: 32 °F to 122 °F (0 °C to 50 °C); Storage: -4 °F to 158 °F (-20 °C to 70 °C)
• Humidity: 95% RH, 0 °C to 30 °C
• Warranty: 3 Years
• Standard Accessories: Power cord, USB cable, test report, and certificate of calibration
• NOTE: For complete specifications. Please see Brocure/Datasheet

• (1) 4079C-GPIB - 50 MHz Arbitrary Waveform Generator with GPIB (4079C-GPIB)
• (1) Power Cord
• (1) USB Cable
• (1) Test Report
• (1) Certificate of Calibration

Brochure/Data Sheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice